Skip to main content

9.8.2 Removing the Power Cords

9.8.2 Removing the Power Cords
Remove the power cords from the SPARC M12 to perform work. After removing the cable clamps from the power cords, remove the power cords.
  1. Release the tab of the cable clamp (A in Figure 9-9).
Figure 9-9  Releasing a Cable Clamp
Figure 9-9  Releasing a Cable Clamp
  1. Remove the power cords from the PSU.
Figure 9-10  Removing the Power Cords
Figure 9-10  Removing the Power Cords