Skip to main content

21.1 XSCF DUAL Control Port


21.1 XSCF DUAL Control Port
The XSCF DUAL control cable is used to connect a SPARC M12-2S that houses the master XSCF or a crossbar box to a SPARC M12-2S that houses the standby XSCF or a crossbar box.
Connect the XSCF DUAL control cable to the XSCF DUAL control port on the rear of the SPARC M12-2S or crossbar box. Figure 21-1 shows the location of the XSCF DUAL control port.
Figure 21-1  Location of the XSCF DUAL Control Port (SPARC M12-2S)
Figure 21-1  Location of the XSCF DUAL Control Port (SPARC M12-2S)
Figure 21-2  Location of the XSCF DUAL Control Port (Crossbar Box)
Figure 21-2  Location of the XSCF DUAL Control Port (Crossbar Box)
Location No. Unit
1 XSCF DUAL control port