Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-2/M12-2S Service Manual >
  9. 6.1.1 Active/Hot Removal Workflow of a PCIe Card

6.1.1 Active/Hot Removal Workflow of a PCIe Card


6.1.1 Active/Hot Removal Workflow of a PCIe Card
Before removing a PCIe card, see "Precautions for PCIe card removal" in "7.3 Precautions for FRU Reduction."
Table 6-1 shows the workflow for active/hot removal of a PCIe card using the PCI Hot Plug function.
Table 6-1  Active/Hot Removal Procedure of a PCIe Card
Work Order Task Reference
1 Checking the operating condition of the system "9.2.1 Checking the Operation Status of Physical Partitions and Logical Domains"
2 Checking the usage status of the PCIe card to be removed "9.2.2 Checking the Assignment Status of I/O Devices"
3 Releasing the I/O resources assigned to the PCIe card to be removed "9.3 Releasing I/O Resources From a Logical Domain"
4 Confirming that you can release the PCIe card to be removed "9.2.1 Checking the Operation Status of Physical Partitions and Logical Domains"
5 Releasing the PCIe card from the system "9.4 Enabling the Removal of Hardware"
6 Checking the operating condition of the physical partition and logical domains (*1) "9.2.1 Checking the Operation Status of Physical Partitions and Logical Domains"
7 Saving logical domain configuration information "9.1.1 Saving Logical Domain Configuration Information"
8 Switching the mode switch on the OPNL to Service "2.3.2 OPNL Control Function"
9 Removing the PCIe card from the SPARC M12-2/M12-2S "12.3.1 Enabling the Removal of a PCIe Card"
10 Removing the PCIe card from the PCICS "12.3.2 Removing a PCIe Card or PCIe Card Filler"
11 Installing a PCIe card filler in the PCICS from which the PCIe card was removed, and installing the PCICS in the SPARC M12-2/M12-2S "12.4.1 Installing a PCIe Card or PCIe Card Filler"
12 Switching the mode switch on the OPNL to Locked "2.3.2 OPNL Control Function"
*1 Reassign I/O resources to logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.