Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-2/M12-2S Service Manual >
  9. 8.1.5 Checking the Operation Status of Physical Partitions

8.1.5 Checking the Operation Status of Physical Partitions


8.1.5 Checking the Operation Status of Physical Partitions
Before changing the physical partition configuration or performing hardware maintenance, log in to the XSCF shell and check the operation status of the target physical partition and the PSB configuration.
The following example shows the information displayed by the command that checks the operation status of a physical partition. For details on the individual commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual of the XCP firmware version used.
Checking the operation status of physical partitions
XSCF> showpcl -a
PPAR-ID LSB PSB Status
00 Running (*1)
00 00-0 (*2)
01 01-0
XSCF>
*1 Operation status of a physical partition
*2 BB-ID (PSB number) and LSB number of the SPARC M12-2S composing physical partition #00
Checking the PSBs composing a physical partition and their operation status
XSCF> showboards -p 0
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------

00-0 00(00) Assigned y y y Passed Normal (*1)
01-0 00(01) Assigned y y y Passed Normal
XSCF>
*1 The physical partition of PPAR-ID#00 is composed of PSB#00-0 (BB-ID#00) and PSB#01-0 (BB-ID#01), and both are operating normally.