Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-2/M12-2S Service Manual >
  9. 10.7 Incorporating I/O Resources Into a Logical Domain

10.7 Incorporating I/O Resources Into a Logical Domain


10.7 Incorporating I/O Resources Into a Logical Domain
This section describes the procedure for incorporating I/O resources into a logical domain. When restoring the I/O configuration of a logical domain after maintenance work or reconfiguring the I/O configuration of a logical domain after adding or removing a hardware resource, perform this procedure as appropriate for the system environment of the logical domain.
For details on the procedure and the commands used, see "3.2 Operations and Commands Related to Logical Domain Configurations" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide, as well as the Oracle VM Server for SPARC Administration Guide and Oracle VM Server for SPARC Reference Manual of the version used.
Note - If you have replaced the CMUL in a system with the HDD/SSD having the hardware RAID configuration, you need to re-enable the hardware RAID volume. For details, see "14.2.11 Re-enabling a Hardware RAID Volume" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.