Contents

1. Preface
2. Chapter 1　Understanding an Overview of the SPARC M12/M10
   1.  1.1　Basics of the SPARC M12/M10
   2.  1.2　Basics of the XSCF Firmware
      1. 1.2.1　XSCF Overview
      2. 1.2.2　XSCF Features
      3. 1.2.3　XSCF Functions
      4. 1.2.4　Master/Standby/Slave XSCF Mechanism
      5. 1.2.5　Differences in XSCF Configurations by Model
   3.  1.3　Network Configuration
      1. 1.3.1　Overview of Network Connections
      2. 1.3.2　XSCF-LAN Port Numbers and Functions, and Firewall
   4.  1.4　Basics of Hypervisor
   5.  1.5　Basics of Oracle VM Server for SPARC
   6.  1.6　Basics of OpenBoot PROM
3. Chapter 2　Logging In/Out of the XSCF
   1.  2.1　Connecting the System Management Terminal
      1. 2.1.1　Connection With the Serial Port
      2. 2.1.2　Available Functions for Terminals in Serial Connection
      3. 2.1.3　Connection With an XSCF-LAN Port
      4. 2.1.4　Available Functions for Terminals in XSCF-LAN Connection
   2.  2.2　Logging In to the XSCF Shell
      1. 2.2.1　How to Log In to the XSCF Shell With a Serial Connection
      2. 2.2.2　How to Log In to the XSCF Shell Through an SSH Connection via the XSCF-LAN
      3. 2.2.3　How to Log In to the XSCF Shell Through a Telnet Connection via the XSCF-LAN
   3.  2.3　Logging Out from the XSCF Shell
   4.  2.4　Logging In to XSCF Web
      1. 2.4.1　Items That Must be Set in Advance
      2. 2.4.2　Supported Browsers
      3. 2.4.3　Functions That Need to be Enabled in the Web Browser
      4. 2.4.4　How to Log In With XSCF Web
   5.  2.5　Logging Out From XSCF Web
   6.  2.6　Number of Connectable Users
4. Chapter 3　Configuring the System
   1.  3.1　Preliminary Work for XSCF Setup
      1. 3.1.1　Initial Work Before Setup
      2. 3.1.2　Support Information
      3. 3.1.3　User Interface for Setup and How to Access
      4. 3.1.4　Proceeding Smoothly With Configuration
   2.  3.2　Understanding the Contents of the XSCF Firmware Settings
      1. 3.2.1　Setting Items for Using the XSCF
      2. 3.2.2　Checking the Master XSCF
      3. 3.2.3　Executable Functions on the Standby XSCF
      4. 3.2.4　Checking Command Options in Detail on the man Pages
   3.  3.3　Setting Up From the XSCF Shell
   4.  3.4　Setting Up From XSCF Web
   5.  3.5　Creating/Managing XSCF Users
      1. 3.5.1　Local User Accounts Saved in the XSCF
      2. 3.5.2　Passwords and Password Policy
      3. 3.5.3　Types of User Privilege
      4. 3.5.4　Checking the Setting Items and Commands Related to XSCF User Accounts
      5. 3.5.5　XSCF User Account Registration Flow
      6. 3.5.6　Confirming Registered Users
      7. 3.5.7　Checking/Changing the Password Policy
      8. 3.5.8　Adding an XSCF User Account and Setting a Password
      9. 3.5.9　Setting a User Privilege
      10. 3.5.10　Enabling/Disabling a User Account
      11. 3.5.11　Enabling/Disabling the Login Lockout Function
      12. 3.5.12　Managing XSCF User Accounts Using LDAP
      13. 3.5.13　Managing XSCF User Accounts Using Active Directory
      14. 3.5.14　Managing XSCF User Accounts Using LDAP over SSL
   6.  3.6　Setting the XSCF Time/Date
      1. 3.6.1　Understanding the Relationship Between the XSCF and Physical Partition Times
      2. 3.6.2　Time Management Policy of a Logical Domain
      3. 3.6.3　Checking the Time-related Setting Items and Commands
      4. 3.6.4　Setting the Time Zone
      5. 3.6.5　Setting Daylight Saving Time
      6. 3.6.6　Setting the System Time
      7. 3.6.7　Synchronizing the Control Domain Time and XSCF Time
      8. 3.6.8　Specifying the XSCF as an NTP Server
      9. 3.6.9　Specifying the XSCF as an NTP Client
      10. 3.6.10　Configuring the NTP Servers Used by the XSCF
      11. 3.6.11　Configuring the DNS Round-Robin of the NTP Server
      12. 3.6.12　Specifying/Canceling prefer for an NTP Server
      13. 3.6.13　Setting the stratum Value of the XSCF
      14. 3.6.14　Changing the Clock Address of the XSCF Local Clock
   7.  3.7　Configuring the SSH/Telnet Service for Login to the XSCF
      1. 3.7.1　Checking the Setting Items and Commands Related to SSH and Telnet
      2. 3.7.2　Enabling/Disabling the SSH and Telnet Services
      3. 3.7.3　Setting an SSH Service Host Key
      4. 3.7.4　Registering/Deleting a User Public Key for the SSH Service
      5. 3.7.5　Setting the SSH/Telnet Service Timeout Time
   8.  3.8　Configuring the HTTPS Service for Login to the XSCF
      1. 3.8.1　Flow When Using an External or Intranet Certificate Authority
      2. 3.8.2　Flow When Using a Self-Signed Certificate Authority
      3. 3.8.3　Checking the HTTPS-related Setting Items and Commands
      4. 3.8.4　Enabling/Disabling the HTTPS Service
      5. 3.8.5　Importing a Web Server Certificate Using an External or Intranet Certificate Authority
      6. 3.8.6　Configuring a Self-Signed Certificate Authority and Creating a Web Server Certificate
   9.  3.9　Configuring the XSCF Network
      1. 3.9.1　Using Services Through the XSCF Network
      2. 3.9.2　Understanding the XSCF Network Interfaces
      3. 3.9.3　XSCF Network Interface Configuration
      4. 3.9.4　Understanding Network Group Subnets
      5. 3.9.5　Understanding the IP Addresses that are Set with SSCP
      6. 3.9.6　Checking the Setting Items and Commands Related to the XSCF Network
      7. 3.9.7　Flow of Configuring the XSCF Network
      8. 3.9.8　Enabling/Disabling the XSCF Network and Setting an XSCF-LAN IP Address and Net Mask
      9. 3.9.9　Setting the Takeover IP Address
      10. 3.9.10　Setting an SSCP IP Address
      11. 3.9.11　Setting an XSCF Host Name and Domain Name
      12. 3.9.12　Setting XSCF Routing
      13. 3.9.13　Setting the DNS for the XSCF
      14. 3.9.14　Setting the IP Packet Filtering Rules for the XSCF Network
      15. 3.9.15　Reflecting the XSCF Network Settings
      16. 3.9.16　Checking the XSCF Network Connection Status
   10.  3.10　Configuring Auditing to Strengthen XSCF Security
       1. 3.10.1　Auditing
       2. 3.10.2　Understanding Audit Terms
       3. 3.10.3　Managing Auditing
       4. 3.10.4　Checking the Audit-related Setting Items and Commands
       5. 3.10.5　Auditing Flow
       6. 3.10.6　Displaying/Setting the Audit Policy
       7. 3.10.7　Enabling/Disabling Auditing
       8. 3.10.8　Deleting Audit Log Data
       9. 3.10.9　Referencing an Audit Log
       10. 3.10.10　Managing the Audit Log of the Standby XSCF
5. Chapter 4　Configuring the System to Suit the Usage Type
   1.  4.1　Setting/Checking the System Altitude
      1. 4.1.1　Setting the System Altitude
      2. 4.1.2　Checking the System Altitude Settings
   2.  4.2　Controlling System Start
      1. 4.2.1　Setting/Checking the Warmup Time
      2. 4.2.2　Setting/Checking the Wait Time for Air Conditioning
   3.  4.3　Enabling/Disabling Dual Power Feed
      1. 4.3.1　Enabling Dual Power Feed
      2. 4.3.2　Disabling Dual Power Feed
      3. 4.3.3　Checking the Dual Power Feed Setting
   4.  4.4　Reducing Power Consumption
      1. 4.4.1　Setting the Upper Limit Value of Power Consumption
      2. 4.4.2　Handling of Abnormal Temperature/Burden Due to Abnormal Power
      3. 4.4.3　Reducing the Power Consumption of Hardware That is Unused or Has a Low Utilization
   5.  4.5　Connecting a DVD Drive
      1. 4.5.1　Using an External DVD Drive
      2. 4.5.2　Using the External DVD Drive to Install Oracle Solaris
   6.  4.6　Using Remote Storage
      1. 4.6.1　What is Remote Storage?
      2. 4.6.2　Remote Storage Network Configuration
      3. 4.6.3　Means of Using Remote Storage
      4. 4.6.4　Operating Requirement of Terminals and Browsers
      5. 4.6.5　Oracle Solaris Settings
      6. 4.6.6　Remote Storage Software Versions
      7. 4.6.7　Remote Storage Device Paths and Aliases
      8. 4.6.8　Notes on Remote Storage
      9. 4.6.9　Flow for Using Remote Storage
      10. 4.6.10　Configuring the XSCF-LAN Used with Remote Storage
      11. 4.6.11　Status of XSCF Remote Storage Server
      12. 4.6.12　Connecting to Media When Using Remote Storage
      13. 4.6.13　Using Remote Storage From Oracle Solaris
      14. 4.6.14　Disconnecting From Media/Ending Remote Storage
      15. 4.6.15　Other Points to Note and Operations
6. Chapter 5　CPU Activation
   1.  5.1　Basic Concepts of CPU Activation
   2.  5.2　CPU Activation Key
   3.  5.3　Adding CPU Core Resources
      1. 5.3.1　Workflow on CPU Core Addition to a Physical Partition and Logical Domain
      2. 5.3.2　Purchase for Additional CPU Activation
      3. 5.3.3　Checking a CPU Activation Key
      4. 5.3.4　Registering a CPU Activation Key
      5. 5.3.5　Assigning a CPU Core Resource to a Physical Partition
      6. 5.3.6　Adding CPU Cores to a Logical Domain
      7. 5.3.7　Saving Logical Domain Configuration Information
   4.  5.4　Deleting CPU Core Resources
      1. 5.4.1　CPU Activation Deletion Workflow
      2. 5.4.2　Removing CPU Cores From Logical Domains
      3. 5.4.3　Saving Logical Domain Configuration Information
      4. 5.4.4　Releasing CPU Core Resources From a Physical Partition
      5. 5.4.5　Checking the CPU Activation Key to be Deleted
      6. 5.4.6　Deleting CPU Activation Keys
   5.  5.5　Moving CPU Core Resources
      1. 5.5.1　CPU Activation Move Workflow
      2. 5.5.2　Checking the CPU Activation Key to be Moved
   6.  5.6　Displaying CPU Activation Information
      1. 5.6.1　Displaying CPU Activation Registration and Setting Information
      2. 5.6.2　Checking the COD Log
      3. 5.6.3　Displaying CPU Activation Key Information
      4. 5.6.4　Displaying the Usage of Activated CPU Core Resources
   7.  5.7　Saving/Restoring CPU Activation Keys
      1. 5.7.1　Saving CPU Activation Keys
      2. 5.7.2　Restoring CPU Activation Keys
   8.  5.8　Troubleshooting CPU Activation Errors
      1. 5.8.1　The Number of CPU Cores in Use Exceeds the Number of Activated CPU Cores
      2. 5.8.2　The Number of Working CPU Cores Drops Below the Number of CPU Activations Because of a Failure
   9.  5.9　Important Notes about CPU Activation
7. Chapter 6　Starting/Stopping the System
   1.  6.1　Starting the System
      1. 6.1.1　Flow From Input Power-on to System Start
      2. 6.1.2　Setting the XSCF Time Before System Startup
      3. 6.1.3　Using the POWER Switch
      4. 6.1.4　Using the poweron Command
   2.  6.2　Stopping the System
      1. 6.2.1　Flow From System Stop to Input Power-off
      2. 6.2.2　Saving the Logical Domain Configuration Information before System Stop
      3. 6.2.3　Stopping the Whole System
   3.  6.3　Rebooting the System
   4.  6.4　Suppressing Starting Oracle Solaris at Power-on
8. Chapter 7　Controlling Physical Partitions
   1.  7.1　Configuring a Physical Partition
   2.  7.2　Setting the Physical Partition Operation Mode
      1. 7.2.1　CPU Mounted on a Physical Partition and CPU Operational Mode
      2. 7.2.2　Checking Power Operation at Power Recovery/Setting Automatic Power-on
   3.  7.3　Powering On a Physical Partition
   4.  7.4　Powering Off a Physical Partition
   5.  7.5　Changing the Configuration of a Physical Partition
9. Chapter 8　Controlling Logical Domains
   1.  8.1　Configuring a Logical Domain
   2.  8.2　Configuring the Oracle Solaris Kernel Zone
      1. 8.2.1　Hardware and Software Requirements of Oracle Solaris Kernel Zones
      2. 8.2.2　CPU Management on Oracle Solaris Kernel Zones
      3. 8.2.3　Notes on Oracle Solaris Kernel Zones
   3.  8.3　Switching to the Control Domain Console From the XSCF Shell
      1. 8.3.1　How to Switch From the XSCF Shell to the Control Domain Console
      2. 8.3.2　Connecting to the Control Domain Console Under Appropriate Circumstances
   4.  8.4　Returning to the XSCF Shell From the Control Domain Console
      1. 8.4.1　How to Switch From the Control Domain Console to the XSCF Shell
      2. 8.4.2　Logging Out From the Control Domain Console
   5.  8.5　Starting a Logical Domain
   6.  8.6　Shutting Down a Logical Domain
   7.  8.7　Ordered Shutdown of Logical Domains
      1. 8.7.1　Domain Table (ldomTable)
      2. 8.7.2　Domain Information (ldom_info) Resources
   8.  8.8　Checking CPU Activation Information
   9.  8.9　Setting the OpenBoot PROM Environment Variables of the Control Domain
      1. 8.9.1　OpenBoot PROM Environment Variables That Can be Set With the XSCF Firmware
      2. 8.9.2　Setting OpenBoot PROM Environment Variables for the Control Domain
      3. 8.9.3　Displaying the Set OpenBoot PROM Environment Variables of the Control Domain
      4. 8.9.4　Initializing the Set OpenBoot PROM Environment Variables of the Control Domain
   10.  8.10　Domain Console Logging Function
       1. 8.10.1　Method of Disabling the Console Logging Function
       2. 8.10.2　Method of Enabling the Console Logging Function
       3. 8.10.3　Service Domain Requirement
       4. 8.10.4　Virtual Console Group Table (ldomVconsTable)
       5. 8.10.5　Console Resources
   11.  8.11　Changing the Configuration of a Logical Domain
   12.  8.12　Setting the Logical Domain Time
   13.  8.13　Collecting a Hypervisor Dump File
       1. 8.13.1　Basics of Hypervisor Dump
       2. 8.13.2　Commands Used With the Hypervisor Dump Function
       3. 8.13.3　Points to Note on Using Hypervisor Dump
   14.  8.14　Managing Logical Domain Resources Associated with CPU Sockets
       1. 8.14.1　Overview of CPU Socket Constraints
       2. 8.14.2　CPU Socket Constraint Hardware and Software Requirements
       3. 8.14.3　CPU Socket Constraint Restrictions
       4. 8.14.4　Creating a Highly Reliable Logical Domain by Using the CPU Socket Constraints
       5. 8.14.5　Configuring Memory Mirroring to the CPU Chip
       6. 8.14.6　Removing the Resources Associated With the CPU Socket From the Control Domain
       7. 8.14.7　Configuring the CPU Socket Constraints to the Logical Domain Configuration
   15.  8.15　Setting the Physical Partition Dynamic Reconfiguration Policy
       1. 8.15.1　Physical Partition Dynamic Reconfiguration Policy
       2. 8.15.2　Details on Resource Reduction Policies
       3. 8.15.3　How to Change the PPAR DR Policy
   16.  8.16　Setting the Maximum Page Size of a Logical Domain
       1. 8.16.1　Maximum Page Size of a Logical Domain
       2. 8.16.2　Advantages of a Larger Maximum Page Size
       3. 8.16.3　Disadvantages of a Larger Maximum Page Size
       4. 8.16.4　Setting and Changing the Maximum Page Size of a Logical Domain
       5. 8.16.5　Checking the Maximum Page Size of a Logical Domain
10. Chapter 9　Managing the Systems Daily
11. Chapter 10　Preparing/Taking Action for Failures
    1.  10.1　Learning about Troubleshooting and Related Functions
    2.  10.2　Receiving Notification by E-mail When a Failure Occurs
       1. 10.2.1　Features of the E-mail Notification Function
       2. 10.2.2　Failure Notification Details
       3. 10.2.3　Checking the Setting Items and Commands Related to E-mail Notification
       4. 10.2.4　E-mail Notification Setting Flow
       5. 10.2.5　Setting the SMTP Server Host Name, Port Number, Reply E-mail Address, and Authentication Method
       6. 10.2.6　Setting the Destination E-mail Address for Notification and Enabling/Disabling the E-mail Notification Function
    3.  10.3　Monitoring/Managing the System Status With the SNMP Agent
       1. 10.3.1　Basics of SNMP
       2. 10.3.2　SNMP-related Terms
       3. 10.3.3　Basics of a MIB Definition File
       4. 10.3.4　Traps
       5. 10.3.5　Checking the Setting Items and Commands Related to the SNMP Agent
       6. 10.3.6　SNMP Agent Setting Flow
       7. 10.3.7　Setting System Management Information on the SNMP Agent and Enabling/Disabling the SNMP Agent
       8. 10.3.8　Configuring SNMPv3 Traps
       9. 10.3.9　Disabling Traps to the Intended Host for SNMPv3
       10. 10.3.10　Enabling/Disabling SNMPv1 and SNMPv2c Communication
       11. 10.3.11　Configuring SNMPv1 and SNMPv2c Traps
       12. 10.3.12　Disabling Traps to the Intended Host for SNMPv1 and SNMPv2c
       13. 10.3.13　Returning the SNMP Settings to the Default Values
       14. 10.3.14　Setting USM Management Information
       15. 10.3.15　Setting VACM Management Information
    4.  10.4　Monitoring the System
       1. 10.4.1　Understanding the Mechanism of the Host Watchdog Function/Alive Check
       2. 10.4.2　Controlling Monitoring and Server Operation
    5.  10.5　Understanding the Failure Degradation Mechanism
    6.  10.6　Checking Failed Hardware Resources
       1. 10.6.1　Checking Failed Memory or CPUs With the list-domain Command
       2. 10.6.2　Checking Failed Memory or CPUs With the list-device Command
    7.  10.7　Setting Automatic Replacement of Failed CPU Cores
       1. 10.7.1　Conditions for Automatically Replacing a CPU Core
       2. 10.7.2　Method of Changing the Automatic Replacement Policy
       3. 10.7.3　Methods of Changing the Maximum Retry Count and Retry Interval
    8.  10.8　Setting Recovery Mode
    9.  10.9　Setting Up a Redundant Component Configuration
    10.  10.10　Saving/Restoring XSCF Settings Information
        1. 10.10.1　Understanding How to Save/Restore XSCF Settings Information
        2. 10.10.2　Saving XSCF Settings Information
        3. 10.10.3　Restoring XSCF Settings Information
    11.  10.11　Saving/Restoring Logical Domain Configuration Information in the XSCF
        1. 10.11.1　Saving/Displaying Logical Domain Configuration Information
        2. 10.11.2　Restoring Logical Domain Configuration Information
    12.  10.12　Saving/Restoring Logical Domain Configuration Information in an XML File
        1. 10.12.1　Saving/Confirming Logical Domain Configuration Information
        2. 10.12.2　Restoring Logical Domain Configuration Information
    13.  10.13　Saving/Restoring the OpenBoot PROM Environment Variables
        1. 10.13.1　Saving the OpenBoot PROM Environment Variables
        2. 10.13.2　Restoring the OpenBoot PROM Environment Variables
    14.  10.14　Saving/Restoring the Contents of a Hard Disk
    15.  10.15　Resetting a Logical Domain
    16.  10.16　Causing a Panic in a Logical Domain
        1. 10.16.1　Causing a Panic in a Guest Domain
        2. 10.16.2　Causing a Panic in a Control Domain
    17.  10.17　Resetting a Physical Partition
    18.  10.18　Returning the Server to the State at Factory Shipment
        1. 10.18.1　Understanding Initialization Commands
        2. 10.18.2　Initializing the Server
    19.  10.19　Collecting a Crash Dump File Using Deferred Dump
12. Chapter 11　Checking the System Status
    1.  11.1　Checking the System Configuration/Status
       1. 11.1.1　Checking the Items and Commands Related to the System Configuration/Status
       2. 11.1.2　Checking Mounted Components in the System
       3. 11.1.3　Checking the System Environment
       4. 11.1.4　Checking Failed/Degraded Components
       5. 11.1.5　Displaying the PCI Expansion Unit Status
    2.  11.2　Checking a Physical Partition
       1. 11.2.1　Checking the Items and Commands Related to the Configuration/Status of Physical Partitions and Logical Domains
       2. 11.2.2　Checking the Physical Partition Configuration
       3. 11.2.3　Checking the Physical Partition Operation Status
       4. 11.2.4　Checking the Memory Mirror Mode Settings
       5. 11.2.5　Checking the PSB Status
       6. 11.2.6　Checking the Logical Domain Status
13. Chapter 12　Checking Logs and Messages
    1.  12.1　Checking a Log Saved by the XSCF
       1. 12.1.1　Checking the Log Types and Reference Commands
       2. 12.1.2　How to View the Log
       3. 12.1.3　Checking the Error Log
       4. 12.1.4　Checking the Monitoring Message Log
       5. 12.1.5　Checking the Power Log
       6. 12.1.6　Checking the Event Log
       7. 12.1.7　Checking the Console Log
       8. 12.1.8　Checking the Panic Log
       9. 12.1.9　Checking the IPL Log
       10. 12.1.10　Checking the Audit Log
       11. 12.1.11　Checking the COD Log
       12. 12.1.12　Checking the Active Directory Logs
       13. 12.1.13　Checking the LDAP over SSL Logs
       14. 12.1.14　Checking the Temperature History Log
       15. 12.1.15　Saving a Log to a File With Snapshot
       16. 12.1.16　Saving a Log to a Local USB Device
       17. 12.1.17　Saving the Log via the Network on the Terminals That Use XSCF Web
       18. 12.1.18　Saving the Log via the Network, on the Servers Specified With Snapshot
    2.  12.2　Checking Warning and Notification Messages
       1. 12.2.1　Checking the Message Types and Reference Methods
       2. 12.2.2　Taking Action for Notification Messages
14. Chapter 13　Switching to Locked Mode/Service Mode
    1.  13.1　Understanding the Differences Between Locked Mode and Service Mode
    2.  13.2　Switching the Operating Mode
15. Chapter 14　Configuring a Highly Reliable System
    1.  14.1　Configuring Memory Mirroring
       1. 14.1.1　Overview of Memory Mirroring
       2. 14.1.2　Configuring Memory Mirroring
    2.  14.2　Configuring Hardware RAID
       1. 14.2.1　Basics of Hardware RAID
       2. 14.2.2　FCode Utility Commands
       3. 14.2.3　Precautions Concerning Hardware RAID
       4. 14.2.4　Preparation Before Hardware RAID Operation
       5. 14.2.5　Creating a Hardware RAID Volume
       6. 14.2.6　Deleting a Hardware RAID Volume
       7. 14.2.7　Managing a Hot Spare of a Hardware RAID Volume
       8. 14.2.8　Checking the Status of a Hardware RAID Volume and a Disk Drive
       9. 14.2.9　Checking for a Failed Disk Drive
       10. 14.2.10　Replacing a Failed Disk Drive
       11. 14.2.11　Re-enabling a Hardware RAID Volume
       12. 14.2.12　Specifying a Hardware RAID Volume as a Boot Device
    3.  14.3　Using the LDAP Service
    4.  14.4　Using SAN Boot
    5.  14.5　Using iSCSI
    6.  14.6　Remote Power Management for the SPARC M12/M10 and I/O Devices
       1. 14.6.1　Remote Power Management Function for the SPARC M12/M10
       2. 14.6.2　Understanding Forms of Connection for Remote Power Management
       3. 14.6.3　Remote Power Management Structure
       4. 14.6.4　Before Setting Remote Power Management
       5. 14.6.5　Flow for Setting Remote Power Management
       6. 14.6.6　Checking the Remote Power Management Setting
       7. 14.6.7　Initializing the Remote Power Management Setting
       8. 14.6.8　Enabling/Disabling the Remote Power Management Function
       9. 14.6.9　Creating a Management File
       10. 14.6.10　Enabling/Disabling the IPMI Service Used by the Remote Power Management Function of the XSCF
       11. 14.6.11　Obtaining Setting Information on a Remote Power Management Group
       12. 14.6.12　Setting a Remote Power Management Group
    7.  14.7　Using an Uninterruptible Power Supply
    8.  14.8　Using Verified Boot
       1. 14.8.1　Basics of Verified Boot
       2. 14.8.2　Mechanism of Boot Verification by Verified Boot
       3. 14.8.3　X.509 Public Key Certificates for Verified Boot
       4. 14.8.4　Verified Boot Policies
       5. 14.8.5　Versions of Oracle Solaris and XCP That Support Verified Boot
       6. 14.8.6　Range of Verified Boot Support
       7. 14.8.7　Notes and Restrictions
       8. 14.8.8　Checking the Setting Items and Commands Related to Verified Boot
       9. 14.8.9　Verified Boot Setting Flow
       10. 14.8.10　Registering an X.509 Public Key Certificate
       11. 14.8.11　Enabling/Disabling a Registered X.509 Public Key Certificate
       12. 14.8.12　Deleting a Registered X.509 Public Key Certificate
       13. 14.8.13　Displaying a Registered X.509 Public Key Certificate
       14. 14.8.14　Setting Verified Boot Policies
       15. 14.8.15　Displaying Verified Boot Policies
16. Chapter 15　Expanding the System Configuration
    1.  15.1　Changing the Virtual CPU Configuration
    2.  15.2　Changing the Memory Configuration
    3.  15.3　Dynamic Reconfiguration Function for PCIe Endpoint Devices
       1. 15.3.1　Adding a Physical I/O Device to an I/O Domain
       2. 15.3.2　Removing a Physical I/O Device From an I/O Domain
    4.  15.4　Using the PCI Expansion Unit
       1. 15.4.1　Checking the PCI Expansion Unit
       2. 15.4.2　Controlling the Power to the PCI Expansion Unit
       3. 15.4.3　Notes on the Configuration in Which the System is Connected to a PCI Expansion Unit
    5.  15.5　Expanding the SPARC M12-2S/M10-4S
17. Chapter 16　Updating the XCP Firmware
    1.  16.1　Basics of Firmware Update
       1. 16.1.1　Types of Firmware to Update
       2. 16.1.2　Features of Firmware Update
       3. 16.1.3　Mechanism of Firmware Update
       4. 16.1.4　Version Matching
       5. 16.1.5　Update When Using Multiple XSCFs
    2.  16.2　Before Updating Firmware
       1. 16.2.1　Notes on Update
       2. 16.2.2　Update File Delivery Method and Format
       3. 16.2.3　Method of Checking the Firmware Version
       4. 16.2.4　Update Methods and Work Times
    3.  16.3　Update Flow
    4.  16.4　Preparing an XCP Image File
    5.  16.5　Updating Firmware
       1. 16.5.1　Updating XCP on a System With One XSCF
       2. 16.5.2　Updating XCP on a Building Block Configuration System With Multiple XSCFs
    6.  16.6　Updating Firmware From XSCF Web
    7.  16.7　Firmware Version Matching with Parts Addition/Replacement
       1. 16.7.1　Firmware Version Matching in Addition/Replacement With the Input Power Turned On
       2. 16.7.2　Firmware Version Matching in Addition/Replacement With the Input Power Turned Off
    8.  16.8　Trouble During Firmware Update
    9.  16.9　FAQ Relating to Firmware Update
18. Chapter 17　Updating Oracle Solaris and Oracle VM Server for SPARC
19. Chapter 18　Troubleshooting
    1.  18.1　Troubleshooting for the XSCF
    2.  18.2　Precautions Concerning Using the RESET Switch
    3.  18.3　Frequently Asked Questions / FAQ
    4.  18.4　System Troubleshooting With the XSCF
20. Appendix A　Lists of SPARC M12/M10 System Device Paths
    1.  A.1　SPARC M12-1 Device Paths
    2.  A.2　SPARC M12-2 Device Paths
       1. A.2.1　For a 1-CPU Configuration at the Initial Installation Time
       2. A.2.2　For a 2-CPU Configuration at the Initial Installation Time
    3.  A.3　SPARC M12-2S Device Paths
       1. A.3.1　For a 1-CPU Configuration at the Initial Installation Time
       2. A.3.2　For a 2-CPU Configuration at the Initial Installation Time
    4.  A.4　SPARC M10-1 Device Paths
    5.  A.5　SPARC M10-4 Device Paths
       1. A.5.1　For a 2-CPU Configuration at the Initial Installation Time
       2. A.5.2　For a 4-CPU Configuration at the Initial Installation Time
    6.  A.6　SPARC M10-4S Device Paths
       1. A.6.1　For a 2-CPU Configuration at the Initial Installation Time
       2. A.6.2　For a 4-CPU Configuration at the Initial Installation Time
21. Appendix B　Identifying an SAS2 Device Based on a WWN
    1.  B.1　World Wide Name (WWN) Syntax
    2.  B.2　Overview of probe-scsi-all Command Output
    3.  B.3　Identifying a Disk Slot by Using the probe-scsi-all Command
       1. B.3.1　Example of Identifying a Disk Slot by Using the probe-scsi-all Command (SPARC M12-1/M12-2/M12-2S/M10-1/M10-4/M10-4S)
    4.  B.4　Identifying Disk Slot
       1. B.4.1　Using the diskinfo Command (Oracle Solaris 11 With SRU 11.4.27.82.1 or Later Applied)
       2. B.4.2　Using the format Command (Oracle Solaris 11 With SRU 11.4.27.82.1 or Later Not Applied)
       3. B.4.3　Using the diskinfo Command (Oracle Solaris 11 With SRU 11.4.27.82.1 or Later Not Applied)
       4. B.4.4　Using the diskinfo Command (Oracle Solaris 10)
22. Appendix C　List of the XSCF Web Pages
    1.  C.1　Overview of the Pages
    2.  C.2　Understanding the Menu Configuration
    3.  C.3　Available Pages
       1. C.3.1　Pages Displaying the Status of the System, Physical Partitions, and Logical Domains
       2. C.3.2　Pages for Operating a Physical Partition
       3. C.3.3　Pages for Configuring the Server
       4. C.3.4　Pages for Maintaining the Server
       5. C.3.5　Pages Displaying Logs
23. Appendix D　XSCF MIB Information
    1.  D.1　MIB Object Identification
    2.  D.2　Standard MIB
    3.  D.3　Extended MIB
       1. D.3.1　XSCF Extended MIB Objects
    4.  D.4　Traps
24. Appendix E　SPARC M12/M10 System-specific Functions of Oracle VM Server for SPARC
    1.  E.1　Ordered Shutdown of Logical Domains
    2.  E.2　CPU Activation Support
    3.  E.3　Checking Failed Resources
       1. E.3.1　Confirming Whether or Not There Has been a Memory or CPU Failure Using the list-domain Sub Command
       2. E.3.2　Displaying Whether or Not There Has been a Memory or CPU Failure Using the list-device Sub Command
    4.  E.4　Automatic Replacement of Failed CPUs
    5.  E.5　Hypervisor Dump
    6.  E.6　Domain Console Logging Function
    7.  E.7　CPU Socket Restrictions
25. Appendix F　SAS2IRCU Utility Command Examples
    1.  F.1　Displaying a List of SAS Controllers Recognized by sas2ircu
    2.  F.2　Displaying the Information of a Hardware RAID Volume
    3.  F.3　Adding a Hardware RAID Volume
    4.  F.4　Displaying the Configuration Status of a Hardware RAID Volume
    5.  F.5　Creating a Hot Spare of a Hardware RAID Volume
    6.  F.6　Deleting a Hot Spare of a Hardware RAID Volume
    7.  F.7　Deleting a Hardware RAID Volume
    8.  F.8　Identifying the Faulty Disk Drive of a Hardware RAID Volume
26. Appendix G　SPARC M12-1/M10-1 XSCF Startup Mode Function
    1.  G.1　Function Overview
       1. G.1.1　What is the XSCF Startup Mode Function?
       2. G.1.2　Conditions of Usage
    2.  G.2　Restrictions and Notes
       1. G.2.1　Restrictions and Notes at the Time of System Installation
       2. G.2.2　Restrictions and Notes at the Time of System Operation
       3. G.2.3　Restrictions at the Time of Maintenance
    3.  G.3　Configuration Procedure
27. Appendix H　OpenBoot PROM Environment Variables and Commands
    1.  H.1　SCSI Device Display
    2.  H.2　Unsupported OpenBoot PROM Environment Variables
    3.  H.3　Unsupported OpenBoot PROM Commands
    4.  H.4　Behavior With the Security Mode Enabled
28. Appendix I　How to Specify the Boot Device
    1.  I.1　Device Path of the Internal Storage
    2.  I.2　Method of Specification With a PHY Number
    3.  I.3　Method of Specification With a Target ID
    4.  I.4　Method of Specification With an SAS Address
    5.  I.5　Method of Specification With a Volume Device Name
    6.  I.6　Notes About the Device Alias net of the SPARC M12 Without On-Board LAN
29. Appendix J　Lists of DVD Drive Aliases
    1.  J.1　External DVD Drive Aliases
       1. J.1.1　SPARC M12-1 External DVD Drive Aliases
       2. J.1.2　SPARC M12-2 External DVD Drive Aliases
       3. J.1.3　SPARC M12-2S External DVD Drive Aliases
       4. J.1.4　SPARC M10-1 External DVD Drive Aliases
       5. J.1.5　SPARC M10-4 External DVD Drive Aliases
       6. J.1.6　SPARC M10-4S External DVD Drive Aliases
    2.  J.2　Remote Storage DVD Drive Aliases
       1. J.2.1　SPARC M12-1 Remote Storage DVD Drive Aliases
       2. J.2.2　SPARC M12-2 Remote Storage DVD Drive Aliases
       3. J.2.3　SPARC M12-2S Remote Storage DVD Drive Aliases
       4. J.2.4　SPARC M10-1 Remote Storage DVD Drive Aliases
       5. J.2.5　SPARC M10-4 Remote Storage DVD Drive Aliases
       6. J.2.6　SPARC M10-4S Remote Storage DVD Drive Aliases
30. Appendix K　CPU Activation Interim Permit
    1.  K.1　What is the CPU Activation Interim Permit?
    2.  K.2　Terms of Use of the CPU Activation Interim Permit and Precautions
    3.  K.3　Related Commands
       1. K.3.1　Commands for Using a CPU Activation Interim Permit
          
       2. K.3.2　Related Commands When Using a CPU Activation Interim Permit
    4.  K.4　Flows and Procedures for Using a CPU Activation Interim Permit
       1. K.4.1　Flow and Procedure for XCP 2330 and Later
       2. K.4.2　Flow and Procedure for XCP 232x
       3. K.4.3　Case Where the Function Has Expired or is Disabled
    5.  K.5　Event Notification of the CPU Activation Interim Permit
       1. K.5.1　Types of Notification
       2. K.5.2　Notification Examples
    6.  K.6　Other Important Notes
       1. K.6.1　PPAR DR and CPU Activation Interim Permit
       2. K.6.2　When Attempting to Use a CPU Activation Interim Permit Again (for XCP 232x Only)
       3. K.6.3　Moving CPU Activation Keys (Deleting/Moving)
       4. K.6.4　Output of the ldm Command