Skip to main content

B.2 Overview of probe-scsi-all Command Output


B.2 Overview of probe-scsi-all Command Output
The output of the probe-scsi-all command of OpenBoot PROM displays a list of all SCSI devices in the system and basic information on each device. The following table lists the displayed items.
Table B-2  probe-scsi-all Command Configuration
Entity Name Description
Target Unique target ID assigned to each SAS device
SASDeviceName WWN value assigned to an SAS device by the manufacturer.
Oracle Solaris recognizes it.
SASAddress WWN value recognized by the OpenBoot PROM firmware and assigned to a SCSI device
PhyNum Hexadecimal number ID of the controller port connected to the target drive
VolumeDeviceName
(when configuring a RAID volume)
WWN value recognized by Oracle Solaris and assigned to a RAID volume.
It replaces the SASDeviceName of each SCSI device included in the RAID volume.
VolumeWWID
(when a configuring a RAID volume)
WWN-based value recognized by the OpenBoot PROM firmware and assigned to a RAID volume.
It replaces the SASAddress of each SCSI device included in the RAID volume.