8.3.1 How to Switch From the XSCF Shell to the Control Domain Console
8.3.1 How to Switch From the XSCF Shell to the Control Domain Console
On a PC with an XSCF-LAN or serial connection, you can operate the XSCF shell and control domain console exclusively in a single window. This section describes the switching procedure.
- Execute the console command on the XSCF shell terminal to switch to the control domain console.
The following example specifies physical partition 0.
XSCF> console -p 0 |
- Confirm that the window switches to the control domain console.
# |
- Only one RW console can be connected per physical partition. If another RW console is forcibly connected by a user with either the platadm or pparadm user privilege for the physical partition, the currently connected RW console is disconnected.
< Previous Page | Next Page >