Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide >
  9. 16.7.1 Firmware Version Matching in Addition/Replacement With the Input Power Turned On

16.7.1 Firmware Version Matching in Addition/Replacement With the Input Power Turned On


16.7.1 Firmware Version Matching in Addition/Replacement With the Input Power Turned On
This section describes how to match the version when replacing CPU memory units (lower) (CMUL), replacing XSCF units, adding the SPARC M12-2S/M10-4S, or adding the crossbar box with the input power turned on.
  1. After the addfru command or replacefru command is executed, if addition/replacement work is done using the maintenance menu, the XSCF firmware version is automatically matched.
    If the addfru command, replacefru command, or testsb command performs a diagnosis test, the CMU firmware version is automatically matched.
  2. After the completion of the addfru, replacefru, or testsb command, execute the version command to check the XCP firmware version.
XSCF> version -c xcp -v
BB#00-XSCF#0 (Master)
XCP0 (Reserve): 2044
CMU : 02.04.0004
POST : 1.43.0
OpenBoot PROM : 4.34.0+1.19.0
Hypervisor : 0.27.3
XSCF : 02.04.0004
XCP1 (Current): 2044
CMU : 02.04.0004
POST : 1.43.0
OpenBoot PROM : 4.34.0+1.19.0
Hypervisor : 0.27.3
XSCF : 02.04.0004
BB#01-XSCF#0 (Standby)
XCP0 (Reserve): 2044
CMU : 02.04.0004
POST : 1.43.0
OpenBoot PROM : 4.34.0+1.19.0
Hypervisor : 0.27.3
XSCF : 02.04.0004
XCP1 (Current): 2044
CMU : 02.04.0004
POST : 1.43.0
OpenBoot PROM : 4.34.0+1.19.0
Hypervisor : 0.27.3
XSCF : 02.04.0004
CMU BACKUP
#0: 02.04.0001
#1: ..