Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide >
  9. 8.3.2 Connecting to the Control Domain Console Under Appropriate Circumstances

8.3.2 Connecting to the Control Domain Console Under Appropriate Circumstances


8.3.2 Connecting to the Control Domain Console Under Appropriate Circumstances
Switching to the control domain console is not possible while the power of the target physical partition is off.
This section describes how to power on the physical partition and connect to the control domain console.
  1. On the XSCF shell terminal, specify a physical partition and execute the poweron command to power on the physical partition.
  2. Referring to "2.2 Logging In to the XSCF Shell," set up and log in to another XSCF shell terminal to display the control domain console in another window.
  3. Execute the console command.
  4. Confirm the switch to the specified control domain console.