Skip to main content

11.2.3 Checking the Physical Partition Operation Status


11.2.3 Checking the Physical Partition Operation Status
You can check the physical partition operation status, including the power disconnection status or initialization status, by using the showpparstatus command. You can obtain the same information by using "Status" of the showpcl command.
Note - For details of the physical partition operation status, see the showpparstatus(8) command man page or the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual.
Note - You can check the status of the logical domains in a physical partition by using the showdomainstatus command. For details, see "11.2.6 Checking the Logical Domain Status."
Note - For details of the physical partition status, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
Operation Procedure
The procedure for checking the physical partition operation status is described below.
  1. Execute the showpparstatus command to check the physical partition status.
    The following example displays the operation status of all physical partitions.
XSCF> showpparstatus -a
PPAR-ID PPAR Status
00 Powered Off
01 Initialization Phase

02 Initialization Phase
03 Running