Skip to main content

4.3.3 Checking the Dual Power Feed Setting


4.3.3 Checking the Dual Power Feed Setting
Use the showdualpowerfeed command of the XSCF firmware to check the dual power feed setting.
XSCF> showdualpowerfeed
The output is any of the following, depending on the status.
  1. Output when dual power feed is enabled
BB#00: Dual power feed is enabled.
  1. Output when dual power feed is disabled
BB#00: Dual power feed is disabled.
  1. Output when dual power feed was changed from enabled to disabled
BB#00:enable -> disable
NOTE: Dual power feed will be change the next time the platform is powered on.
  1. Output when dual power feed was changed from disabled to enabled
BB#00:disable -> enable
NOTE: Dual power feed will be change the next time the platform is powered on.
Operation Procedure
  1. Check the dual power feed setting with the showdualpowerfeed command.
    In the following example, you can see a change from disabled to enabled in a system configuration with BB-ID 0 and BB-ID 1.
XSCF> showdualpowerfeed
BB#00:disable -> enable
BB#01:disable -> enable
NOTE: Dual power feed will be change the next time the platform is powered on.