Skip to main content

3.9.6 Checking the Setting Items and Commands Related to the XSCF Network


3.9.6 Checking the Setting Items and Commands Related to the XSCF Network
Table 3-23 lists the setting items related to the XSCF network and the corresponding XSCF shell commands.
An XSCF reboot is necessary for the completion of configuration of the network. Use the rebootxscf command to reboot the XSCF. The XSCF reboot disconnects the XSCF session, so log in to the XSCF again.
Table 3-23  Setting Items Related to the XSCF Network
Setting Item Required or Optional Setting Related Command
XSCF network IP address
- XSCF-LAN

- Takeover IP address

- SSCP
Required setnetwork(8), shownetwork(8)
setsscp(8), showsscp(8)
Enabling/Disabling the network Optional setnetwork(8), shownetwork(8)
Net mask Required setnetwork(8), shownetwork(8)
setsscp(8), showsscp(8)
Host name/domain name Optional sethostname(8), showhostname(8)
Adding/Deleting a network route
- Destination IP address

- Gateway

- Net mask
Required setroute(8), showroute(8)
Adding/Deleting a DNS
- Name server

- Search path
Optional setnameserver(8),
shownameserver(8)
IP packet filtering rule Optional setpacketfilters(8), showpacketfilters(8)
Applying the network Required applynetwork(8)