Skip to main content

4.5.1 Using an External DVD Drive


4.5.1 Using an External DVD Drive
The SPARC M12/M10 chassis has been prepared with USB ports at the front and rear. To use an external DVD drive, connect it to one of the USB ports. Use a dedicated AC adapter to supply power to the connected external DVD drive.
Figure 4-1  USB Port (SPARC M12-1) that can be Connected to a DVD Drive
Figure 4-1  USB Port (SPARC M12-1) that can be Connected to a DVD Drive
Figure 4-2  USB Port (SPARC M12-2) that can be Connected to a DVD Drive
Figure 4-2  USB Port (SPARC M12-2) that can be Connected to a DVD Drive
Figure 4-3  USB Port (SPARC M12-2S) that can be Connected to a DVD Drive
Figure 4-3  USB Port (SPARC M12-2S) that can be Connected to a DVD Drive
Figure 4-4  USB Port (SPARC M10-1) that can be Connected to a DVD Drive
Figure 4-4  USB Port (SPARC M10-1) that can be Connected to a DVD Drive
image
Figure 4-5  USB port (SPARC M10-4/M10-4S) that can be connected to a DVD drive
Figure 4-5  USB port (SPARC M10-4/M10-4S) that can be connected to a DVD drive