10.3.10 Enabling/Disabling SNMPv1 and SNMPv2c Communication
10.3.10 Enabling/Disabling SNMPv1 and SNMPv2c Communication
The community string for enabling SNMPv1 and SNMPv2c is Read-Only.
- Execute the showsnmp command to display the SNMP settings.
XSCF> showsnmp |
- Execute the setsnmp command to enable SNMPv1 and SNMPv2c communication.
The following example specifies the enablev1v2c operand to enable SNMPv1 and SNMPv2c.
XSCF> setsnmp enablev1v2c public |
- The following example specifies the disablev1v2c operand to disable SNMPv1 and SNMPv2c.
XSCF> setsnmp disablev1v2c |
- Execute the setsnmp command to enable the SNMP agent.
XSCF> setsnmp enable |
- Execute the showsnmp command, and confirm that the agent is enabled/disabled.
XSCF> showsnmp |
< Previous Page | Next Page >