Skip to main content

F.1 Displaying a List of SAS Controllers Recognized by sas2ircu


F.1 Displaying a List of SAS Controllers Recognized by sas2ircu
Use the sas2ircu list command to display a list of SAS controllers recognized by sas2ircu.
The following example shows that Adapter Type = SAS2308_2 is an internal SAS controller.
Check the Index number displayed for the internal SAS controller.
The following shows an example of the SPARC M12-2.
Note - In SPARC M12-2/M12-2S systems or a system configuration with multiple SPARC M12-2S/M10-4S units, multiple SAS controllers are displayed, but you cannot identify their installation locations using the Index number. The sas2ircu display command can identify the installation locations of SAS controllers. For details on the sas2ircu display command, see "F.2 Displaying the Information of a Hardware RAID Volume."
# ./sas2ircu list
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.


Adapter Vendor Device SubSys SubSys
Index Type ID ID Pci Address Ven ID Dev ID
----- ------------ ------ ------ ----------------- ------ ------

0 SAS2308_2 1000h 87h 00h:03h:00h:00h 10cfh 187eh

Adapter Vendor Device SubSys SubSys
Index Type ID ID Pci Address Ven ID Dev ID
----- ------------ ------ ------ ----------------- ------ ------

1 SAS2308_2 1000h 87h 00h:03h:00h:00h 10cfh 187eh