8.14.2 CPU Socket Constraint Hardware and Software Requirements
8.14.2 CPU Socket Constraint Hardware and Software Requirements
This feature is supported on the SPARC M12/M10 platforms. However, since SPARC M12-1/M10-1 has a one-CPU configuration, it has no meaning in this feature.
To use the CPU socket constraints on the SPARC M12/M10, the system must meet the following requirements.
To use the CPU socket constraints on the SPARC M12/M10, the system must meet the following requirements.
- Runs Oracle VM Server for SPARC 3.3 or later
- Runs XCP 2210 or later of the XCP firmware for SPARC M10
To enable the --remap option of the CPU socket constraints, XCP 2260 or later of the XCP firmware is required.
For SPARC M12, there are no XCP firmware requirements. - Uses M12-2/M12-2S/M10-4/M10-4S(s)
< Previous Page | Next Page >