Skip to main content

12.1.6 Checking the Event Log


12.1.6 Checking the Event Log
In these systems, the event log is collected when an event such as the following occurs in the system or a physical partition: the system status changes, the configuration is changed, the operation panel is operated, or Oracle Solaris is notified of an event. Use the showlogs command with the event operand specified to refer to the event log.
Operation Procedure
  1. Execute the showlogs command with the event operand specified on the XSCF shell.
XSCF> showlogs event
Date Message
Oct 20 17:45:31 JST 2012 System power on
Oct 20 17:55:31 JST 2012 System power off
The following content is displayed.
  1. Event log collection time (Date)
    It is shown in local time.
  2. Event message (Message)