Skip to main content

10.3.9 Disabling Traps to the Intended Host for SNMPv3


10.3.9 Disabling Traps to the Intended Host for SNMPv3
  1. Execute the showsnmp command to display the SNMP settings.
XSCF> showsnmp
  1. Execute the setsnmp command to disable the intended trap destination host for SNMPv3.
    The following example specifies, along with the remv3traphost operand, a user name and a host name.
XSCF> setsnmp remv3traphost -u yyyyy host3
  1. Execute the showsnmp command, and confirm that the intended trap destination host is disabled.
XSCF> showsnmp