Skip to main content

12.1.2 How to View the Log


12.1.2 How to View the Log
This section describes how to view the information in each XSCF log.
Checking the Log on the XSCF Shell or XSCF Web
The common procedure for referencing each log is described below.
  1. Check the user privileges required for referencing logs.
    The user privileges for each log are as in Table 12-5.
Table 12-5  User Privileges Required for Referencing Logs
Log Type Required User Privilege
Error log platadm, platop, fieldeng
Monitoring message log platadm, platop, fieldeng
Power log platadm, platop, pparadm, pparmgr, fieldeng
Event log platadm, platop, fieldeng
Console log platadm, platop, pparadm, pparmgr, pparop, fieldeng
Panic log platadm, platop, pparadm, pparmgr, pparop, fieldeng
IPL log platadm, platop, pparadm, pparmgr, pparop, fieldeng
Audit log auditadm, auditop
COD log platadm, platop, fieldeng
Temperature history log platadm, platop, fieldeng
Active Directory log useradm
LDAP over SSL log useradm
  1. Specify the host name or IP address to connect to the XSCF shell terminal or XSCF Web.
  2. Specify an XSCF user account that has the required user privilege, and a password to log in to the XSCF.
  3. Execute the command for referring to the relevant log, or select this operation from the menu.
  4. Refer to the log.
Note - For details of the XSCF Web menu, see "Appendix C List of the XSCF Web Pages."