Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide >
  9. B.4.1 Using the diskinfo Command (Oracle Solaris 11 With SRU 11.4.27.82.1 or Later Applied)

B.4.1 Using the diskinfo Command (Oracle Solaris 11 With SRU 11.4.27.82.1 or Later Applied)


B.4.1 Using the diskinfo Command (Oracle Solaris 11 With SRU 11.4.27.82.1 or Later Applied)
  1. Execute the diskinfo command, and check the physical disk slot and the logical system board.
    In the examples that follow, (1) and (2) indicate the following:
    (1) The logical path name of the disk installed in HDD 4 of BB#00

    (2) The logical path name of the disk installed in HDD 7 of BB#00
# diskinfo
D:devchassis-path c:occupant-compdev
------------------------------ ---------------------

/dev/chassis/SYS/BB0/HDD0 -
/dev/chassis/SYS/BB0/HDD1 -
/dev/chassis/SYS/BB0/HDD2 -
/dev/chassis/SYS/BB0/HDD3 -
/dev/chassis/SYS/BB0/HDD4/disk c5t50000393D82954D6d0 (1)
/dev/chassis/SYS/BB0/HDD5 -
/dev/chassis/SYS/BB0/HDD6 -
/dev/chassis/SYS/BB0/HDD7/disk c5t50000393B81B2446d0 (2)