Skip to main content

6.1.3 Fixing the cable support (if it is a new model)


6.1.3 Fixing the cable support (if it is a new model)
After performing maintenance on a FRU at the rear of the SPARC M10-4/M10-4S, lift the cable support and fix it in place.
  1. Lift the cable support and fasten the hooks (B in Figure 6-4) on the screws (C in Figure 6-4).
Figure 6-4  Handling the cable support
Figure 6-4  Handling the cable support
  1. Tighten the right and left screws (A in Figure 6-5) to fix the cable support in place.
Figure 6-5  Locking the cable support
Figure 6-5  Locking the cable support