Skip to main content

11.3 Removing a Fan Unit

11.3 Removing a Fan Unit
This section describes the procedure for removing a fan unit. Enable the removal of the fan unit before attempting to remove it. For details, follow the procedure in "Chapter 7 Maintenance Flow."
Caution - Before you handle any components, wear a wrist strap to ground any static electricity. If you perform this procedure without a wrist strap, individual components or the overall system may be damaged. For details, see "1.5 Precautions on Static Electricity."
  1. Pull out the fan unit while raising its lever.
Figure 11-2  Lever of fan unit
Figure 11-2  Lever of fan unit
  1. Carefully remove the fan unit from its slot.
Note - Place the removed fan unit on a grounded antistatic ESD mat.