Skip to main content

17.4 Installing an XSCF DUAL Control Cable


17.4 Installing an XSCF DUAL Control Cable
This section describes the procedure for installing an XSCF DUAL control cable.
  1. Attach the supplied connection destination label to the replacement XSCF DUAL control cable.
    For the new XSCF DUAL control cable, use the same type of label as the one on the cable requiring maintenance and write the same port number on it.
  2. Connect the XSCF DUAL control cable to SPARC M10-4S or the crossbar box.
Note - Check that XSCF DUAL control cable is correctly connected and secure.
Note - After connecting the XSCF DUAL control cable, use the hook-and-loop fastener to bundle the cables together and fasten them to rear cable support.
The FRU installation work is completed. See "Chapter 7  Maintenance Flow" to continue maintenance work.