Skip to main content

17.2 Configuration of the XSCF DUAL Control Ports


17.2 Configuration of the XSCF DUAL Control Ports
This section describes configuration and location of the XSCF DUAL control ports.
The XSCF DUAL control cable is used to connect the master XSCF and a standby XSCF that are mounted on a SPARC M10-4S or crossbar box so as to duplicate the XSCF.

Figure 17-1  Location of XSCF DUAL control port (SPARC M10-4S)
Figure 17-1  Location of XSCF DUAL control port (SPARC M10-4S)
Figure 17-2  Location of XSCF DUAL control port (crossbar box)
Figure 17-2  Location of XSCF DUAL control port (crossbar box)
Location number Connection port
1 XSCF DUAL control port