Skip to main content

16.4 Installing an XSCF BB Control Cable


16.4 Installing an XSCF BB Control Cable
This section describes the procedure for installing the XSCF BB control cables.
  1. Attach the supplied connection destination label to the new replacement XSCF BB control cable.
    For the new XSCF BB control cable, use the same type of label as the one on the cable requiring maintenance and write the same port number on it.
  2. Connect the XSCF BB control cable to SPARC M10-4S or the crossbar box.
Note - Check that the XSCF BB control cables are correctly connected and secure.
Note - After connecting the XSCF BB control cable, use the hook-and-loop fastener to bundle the cables together and secure them to the rear cable support.
The FRU installation work is completed. See "Chapter 7  Maintenance Flow" to continue maintenance work.