Skip to main content

10.5 Installing an Internal Disk

10.5 Installing an Internal Disk
This section describes the procedure for installing an internal disk. Perform expansion using the same procedure.
  1. When expanding an internal disk, remove the internal disk filler unit from the slot in which the disk is to be installed.
  2. With the lever opened, hold the internal disk.
  3. Carefully insert the internal disk into the slot.
Caution - Do not force the internal disk into the slot. Using excessive force may damage the component or the chassis.
  1. Close the lever to secure the internal disk.
Note - Ensure that the internal disks are firmly inserted and secured.
The FRU installation work is completed. See "Chapter 7 Maintenance Flow" to continue maintenance work.