Skip to main content

6.1.1 Installing the power cord

6.1.1 Installing the power cord
If the power cord of the SPARC M10-4/M10-4S was removed to perform the maintenance work, connect the power cord and then attach the cable clamp to the power cord.
For system-stopped/all power-off cold maintenance, install all the SPARC M10-4S power cords.
  1. Connect the power cord to the PSU backplane unit.
    Insert the power cord straight into the PSU backplane unit all the way.
Figure 6-1  Installing the power cord
Figure 6-1  Installing the power cord
  1. Clip the power cords with the cable clamp, and secure the cable clamp.
    Lock the latch (A in Figure 6-2) and then push the cable clamp toward the front of the chassis to firmly secure the cable clamp.
Figure 6-2  Locking the cable clamp
Figure 6-2  Locking the cable clamp