Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10-4S/SPARC M10-4S Installation Guide >
  9. A.3.2 Mistaken setting of a BB-ID other than BB#00 or BB#01

A.3.2 Mistaken setting of a BB-ID other than BB#00 or BB#01


A.3.2 Mistaken setting of a BB-ID other than BB#00 or BB#01
If the setting of a BB-ID other than BB#00 or BB#01 is incorrect when the input power is turned on, restore it according to the following procedure.
Figure A-3  Mistaken setting of a BB-ID other than BB#00 or BB#01
Figure A-3  Mistaken setting of a BB-ID other than BB#00 or BB#01
  1. Remove the power cords of all chassis from the power supply units.
  2. Change the BB-ID to the correct setting.
    For details, see "4.1 Setting the ID (BB-ID) Identifying a Chassis."
  3. Connect the power cords of all chassis to the power supply units.
  4. Connect the system management terminal to the serial port of the master XSCF.
  5. Proceed with work by returning to "6.3 Logging In to the XSCF."