Skip to main content

3.4 Mounting the Chassis in a Rack


3.4 Mounting the Chassis in a Rack
This section describes the procedures for mounting the chassis in an equipment rack. The method of securing the rails differs depending on the rack type. As described in this section, the methods of securing them differ between the racks with supporting columns having square holes and the racks with supporting columns having M6 screw holes.
For rack details, see the manual for the rack used.
If the chassis has already been mounted in the rack, go to "3.5 Mounting Optional Components."
For the rack mounting procedure of each chassis, see the following sections: