Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10-4S/SPARC M10-4S Installation Guide >
  9. 9.5.2 Performing the work of installing the expansion racks

9.5.2 Performing the work of installing the expansion racks


9.5.2 Performing the work of installing the expansion racks
This section describes the procedure for connecting power cords to the power distribution units (PDUs) of expansion racks 1 and 2, and then connecting and installing the racks.
  1. Confirm the delivered components of expansion rack 1 and expansion rack 2.
    For details, see "3.2.3 Confirming the delivered components of an expansion rack."
  2. Before installing the rack, connect the power cords to a power distribution unit (PDU) of the rack.
    For details, see "3.3.1 Connecting the power cords to the power distribution units of an expansion rack."
  3. Connect expansion racks 1 and 2.
    For details, see "3.3.3 Connecting racks."