Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu M10-4S/SPARC M10-4S Installation Guide >
  9. 3.2.2 Confirming the delivered components of the PCI expansion unit

3.2.2 Confirming the delivered components of the PCI expansion unit


3.2.2 Confirming the delivered components of the PCI expansion unit
This section describes the confirmation of delivered components of the PCI expansion unit.
  1. Confirm the delivered components by referring to the List of Attachments that comes with the PCI expansion unit.
    Table 3-4 below is a list of accessories for the PCI expansion unit. The accessories may change without notice.
Table 3-4  Reference: List of accessories for the PCI expansion unit
Name Quantity Remarks
PCI expansion unit 1  
Power cord 2 For 100 VAC or 200 VAC (*1)
Core 2 Used when attached to power cord
Rack mount kit
1 set
 
Cable support
1 set
 
Link cable (optical, 10 m) 2 Either of two types of cables is selected (*2)
Link cable (electrical, 3 m)
Management cable 1 (*2)
Link card 1 Card for mounting in the SPARC M10-4S chassis (*3)
*1 The power cord is ordered separately (required option), so it may not come with the product.
*2 If ordered at the same time as the SPARC M10-4S, the cable is supplied with the SPARC M10-4S.
*3 If ordered at the same time as the SPARC M10-4S, the card is shipped mounted in the SPARC M10-4S.
  1. Confirm that the PCIe card cassette lever is locked at the bottom.