Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-2S Installation Guide >
  9. D.1 From Installation of the 1BB Configuration to Initial Diagnosis

Contents

  1. Preface
  2. Chapter 1 Understanding the Installation Flow
    1. Click 1.1 Workflows for the SPARC M12-2S
    2.  1.2 Workflow at Expansion With the PCI Expansion Unit
  3. Chapter 2 Planning and Preparing for System Installation
    1.  2.1 Safety Precautions
    2.  2.2 Items Requiring Confirmation Before Installation
    3. Click 2.3 Confirming the Physical Specifications of the System
    4. Click 2.4 Confirming Rack Specifications
    5. Click 2.5 Checking Environmental Conditions
    6.  2.6 Checking Acoustic Noise Levels
    7.  2.7 Checking Cooling Conditions
    8. Click 2.8 Checking the Power Input Type
    9. Click 2.9 Preparing Power Supply Facilities
    10. Click 2.10 Checking External Interface Port Specifications
    11.  2.11 Checking the Functions of the Operation Panel
  4. Chapter 3 Installing the System
    1.  3.1 Preparing the Necessary Tools/Information for Installation
    2. Click 3.2 Confirming Delivered Components
    3. Click 3.3 Installing the Rack
    4. Click 3.4 Mounting the SPARC M12-2S and the PCI Expansion Unit in a Rack
    5. Click 3.5 Mounting Optional Components
  5. Chapter 4 Setting the SPARC M12-2S in a Building Block Configuration
    1.  4.1 Setting the ID (BB-ID) Identifying the SPARC M12-2S
    2. Click 4.2 Connecting XSCF Cables
    3. Click 4.3 Connecting Crossbar Cables
    4. Click 4.4 Storing Crossbar Cables
  6. Chapter 5 Connecting Cables to the SPARC M12-2S and the PCI Expansion Unit
    1.  5.1 Connecting Cables to the SPARC M12-2S
    2.  5.2 Connecting Cables to the PCI Expansion Unit
    3.  5.3 Connecting Cables to the Crossbar Box
    4.  5.4 Storing Cables
  7. Chapter 6 Performing an Initial System Diagnosis
    1.  6.1 Connecting the System Management Terminal
    2. Click 6.2 Turning On the Input Power
    3.  6.3 Logging In to the XSCF
    4.  6.4 Confirming the XCP Firmware Version
    5.  6.5 Checking the Altitude Setting
    6.  6.6 Setting the Time
    7.  6.7 Performing a Diagnosis Test
    8.  6.8 Checking the Component Status
  8. Chapter 7 Making the Initial System Settings
    1.  7.1 Setting the Password Policy
    2.  7.2 Setting a User Account and Password
    3. Click 7.3 Configuring the Telnet/SSH Service
    4.  7.4 Configuring the HTTPS Service
    5. Click 7.5 Configuring the XSCF Network
    6.  7.6 Configuring Memory Mirroring
    7.  7.7 Creating a PPAR Configuration List
    8. Click 7.8 Assigning/Releasing a Physical System Board (PSB) for a Physical Partition (PPAR)
    9.  7.9 Synchronizing the Physical Partition (PPAR) Time and XSCF Time
    10. Click 7.10 Registering a CPU Activation Key
    11.  7.11 Assigning CPU Core Resources
    12. Click 7.12 Starting and Stopping a Physical Partition (PPAR)
    13.  7.13 Installing Oracle Solaris
    14. Click 7.14 Saving Configuration Information
  9. Chapter 8 Expanding a System With a Building Block Configuration
    1.  8.1 Points of Concern During Expansion
    2. Click 8.2 Preparation for Expansion
    3. Click 8.3 SPARC M12-2S Expansion Work
    4.  8.4 Incorporating the SPARC M12-2S to be Added
    5.  8.5 Initial Diagnosis of the SPARC M12-2S to be Added
  10. Chapter 9 Reducing a System With a Building Block Configuration
    1.  9.1 Points of Concern During Reduction
    2. Click 9.2 Preparation for Reduction
    3. Click 9.3 SPARC M12-2S Reduction Work
  11. Appendix A Troubleshooting
    1.  A.1 Understanding the Usual Problems and Their Corrective Actions
    2. Click A.2 Understanding Commands for Troubleshooting
    3. Click A.3 How to Restore a BB-ID From an Incorrect Setting
  12. Appendix B Cable Connection Information on Building Block Configurations
    1.  B.1 2BB Configuration (Direct Connections Between Chassis)
    2.  B.2 3BB Configuration (Direct Connections Between Chassis)
    3.  B.3 4BB Configuration (Direct Connections Between Chassis)
    4.  B.4 From the 2BB Configuration to 8BB Configuration (Connections via a Crossbar Box)
    5.  B.5 From the 9BB Configuration to 16BB Configuration (Connections via a Crossbar Box)
    6.  B.6 Power Cord Connections in Expansion Racks
  13. Appendix C Setup Command Workflow
  14. Appendix D Installation Procedure Checklist
    1.  D.1 From Installation of the 1BB Configuration to Initial Diagnosis
    2.  D.2 From Installation to Initial Diagnosis of Configuration With Direct Connections Between Chassis

D.1 From Installation of the 1BB Configuration to Initial Diagnosis


D.1 From Installation of the 1BB Configuration to Initial Diagnosis
Table D-1  Work Descriptions and References (1BB Configuration)
Work Description Check Checked By Installation Guide Reference
1. Before installing the system, check the safety precautions, system specifications, and necessary conditions for installation. [   ]   "Chapter 2 Planning and Preparing for System Installation"
2. Prepare the necessary tools/information for installation. [   ]   "3.1 Preparing the Necessary Tools/Information for Installation"
3. Confirm the delivered components. [   ]   "3.2.1 Confirming the Delivered Components of the SPARC M12-2S"
    [   ]   "3.2.2 Confirming the Delivered Components of the PCI Expansion Unit"
4. Install the rack. [   ]   "2.4.1 Mounting Conditions for General Racks"
5. Mount the SPARC M12-2S in the rack. [   ]   "3.4.1 Mounting the SPARC M12-2S in a Rack"
6. If there is a PCI expansion unit, mount it in the rack. [   ]   "3.4.2 Mounting the PCI Expansion Unit in a Rack"
7. After mounting the SPARC M12-2S, confirm the complete contact (complete engagement) of the internal storage, fan unit, and PCI cassettes.
At this time, confirm that the PCI cassette lever is locked.		 [   ]    
8. If there are optional internal components, mount them in the SPARC M12-2S and the PCI expansion unit.
(For details, see the service manual.)		 [   ]   "3.5.1 Mounting Optional Components in the SPARC M12-2S"
"3.5.2 Mounting Optional Components in the PCI Expansion Unit"

Fujitsu SPARC M12-2/M12-2S Service Manual
"Chapter 12 Maintaining PCIe Cards"
"Chapter 15 Maintaining Internal Storage"
"Chapter 17 Maintaining the CPU Memory Unit and Memory"
9. Connect the serial cable and LAN cables to the SPARC M12-2S.
Attach the core to the power cord, and connect the power cord to the power supply unit.		 [   ]   "5.1 Connecting Cables to the SPARC M12-2S"
10. Connect the link cables and management cable to the PCI expansion unit and the SPARC M12-2S.
Attach the core to the power cord, and connect the power cord to the PCI expansion unit.		 [   ]   "5.2 Connecting Cables to the PCI Expansion Unit"
11. Store the cables connected to the SPARC M12-2S in the rack. Check the rack in use, and store them in a way that is appropriate for the rack. [   ]   "5.4 Storing Cables"
"4.4.1 When the Rack Width is 700 mm"
"4.4.2 When the Rack Width is 600 mm"
12. Connect the system management terminal to the SPARC M12-2S. [   ]   "6.1 Connecting the System Management Terminal"
13. Turn on the input power, and check the status from the LED display on the XSCF unit. [   ]   "6.2.2 Turning On the Input Power and Starting the XSCF"
14. Log in to the XSCF. [   ]   "6.3 Logging In to the XSCF"
15. Check the version of the XCP firmware. [   ]   "6.4 Confirming the XCP Firmware Version"
16. Set the altitude. [   ]   "6.5 Checking the Altitude Setting"
17. Set the time. [   ]   "6.6 Setting the Time"
18. Perform the initial diagnosis test. (*1) [   ]   "6.7 Performing a Diagnosis Test"
19. Confirm that each component is normally recognized and that no errors occur. [   ]   "6.8 Checking the Component Status"
*1 The probe-scsiall command and the show-devs command are displayed as command options in the diagnosis test. Confirm that the capacity and number of mounted disk units and the mounting locations and device names of the PCIe cards are correct.

Top of Page