Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12-2S Installation Guide >
  9. 7.14.1 Saving Logical Domain Configuration Information

7.14.1 Saving Logical Domain Configuration Information


7.14.1 Saving Logical Domain Configuration Information
If you have changed the configuration of a logical domain, execute the ldm add-spconfig command to save the logical domain information to the XSCF. In this way, the logical domain configuration is the same at the next system startup.
If you do not save the logical domain configuration information, the domain will start with the previous configuration information the next time that the physical partition starts.
  1. Switch from the XSCF shell to the control domain console of the target physical partition.
  2. Execute the ldm list-spconfig command to display the currently saved logical domain configuration information.
primary# ldm list-spconfig
  1. Execute the ldm add-spconfig command to save the logical domain status as configuration information.
    The following example shows that the file named ldm_set1 is the save destination.
primary# ldm add-spconfig ldm_set1
  1. Execute the ldm list-spconfig command, and confirm that the configuration information was saved correctly.
  1. Save the logical domain configuration information to an XML file.
    To prepare for an unexpected system failure, save the logical domain configuration information to an XML file, and save it outside the system too.
    For details on how to save the configuration information on logical domains to an XML file, see "10.12 Saving/Restoring Logical Domain Configuration Information in an XML File" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.