Skip to main content

2.8 Checking the Power Input Type


2.8 Checking the Power Input Type
This section describes the power input types that can be used with the SPARC M12-2S. To prevent serious accidents, confirm that the power supply facilities can supply sufficient redundant power to the system.
In addition, we recommend installing a circuit breaker for each power cord for stable device operation. If multiple power cords are connected to one circuit breaker, multiple power supply units will be affected when the circuit breaker cuts off power.

The server can use the following power input types:
  1. Redundant Configuration of Power Supply Units
  2. Dual power feed
  3. Three-phase power feed
  4. Uninterruptible power supply (UPS) connection (optional)
  5. Power distribution unit connection