Manual Code: C120-E680-20
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
Contents
- Preface
- Chapter 1 Understanding an Overview of Domain Configuration
- Chapter 2 Conditions and Settings for System Operation
- Chapter 3 Operations for Domain Configuration
- Chapter 4 Configuring a Physical Partition
- Chapter 5 Logical Domain Configuration Example
- Chapter 6 Physical Partition Reconfiguration
- 6.1 Flow for Physical Partition Reconfiguration
- 6.2 Example of System Board Addition
- 6.3 Example of Operations for Deleting a System Board
- 6.4 Example of Operations for Moving a System Board
- 6.5 Example of Operations for Replacing a System Board
- 6.6 Considerations When Changing a Physical Partition Number
- Chapter 7 Migrating a Guest Domain
- Appendix A Environment Configuration Examples and Procedures Using Physical Partition Dynamic Reconfiguration
- A.1 Updating a System That Does Not Support Physical Partition Dynamic Reconfiguration to One That Does Support It
- A.2 For New Installations from XCP 2220 or Later, Where the Logical Domain Configuration Has No Free Space for Hardware Resources
- A.3 For New Installations from XCP 2220 or Later, Where the Logical Domain Configuration Has Free Hardware Resources
- A.4 For Expansion of a Newly Installed System of Version XCP 2220 or Later from the 1BB to 2BB Configuration
- A.5 For Installation of the System Board Configured by the SPARC64 X+ Processor to the Physical Partition Configured Only by the SPARC64 X Processor
- A.6 For Active Replacement of a System Board in a Configuration with Only the Control Domain (for Oracle VM Server for SPARC 3.2 or Later)
- Appendix B Supplementary Information for Using Dynamic Reconfiguration
- Appendix C Meanings of Messages and Corresponding Corrective Action