Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide >
  9. A.4 For Expansion of a Newly Installed System of Version XCP 2220 or Later from the 1BB to 2BB Configuration

A.4 For Expansion of a Newly Installed System of Version XCP 2220 or Later from the 1BB to 2BB Configuration


A.4 For Expansion of a Newly Installed System of Version XCP 2220 or Later from the 1BB to 2BB Configuration
This section describes an example of constructing an environment in which a SPARC M10-4S with a 1BB configuration is expanded to a 2BB configuration with physical partition dynamic reconfiguration while the physical partition is being operated. It also describes the related procedure for environment construction. An example is used for explanation.
However, the SPARC M10-4S with the 1BB configuration assumes that the system configuration has been completed, including the XCP firmware and Oracle Solaris-related software conditions and XSCF setting. System configuration is required to use the physical partition dynamic reconfiguration.
This description also applies to SPARC M12.