Skip to main content
  1. Home >
  2. Products >
  3. Computing Products >
  4. Servers >
  5. Fujitsu SPARC servers >
  6. Downloads >
  7. User Manuals >
  8. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide >
  9. 3.1 Operations and Commands Related to Physical Partition Configurations

3.1 Operations and Commands Related to Physical Partition Configurations


3.1 Operations and Commands Related to Physical Partition Configurations
The XSCF provides two user interfaces for physical partition configuration: the command line-based XSCF shell and Web browser-based XSCF Web. This section describes the XSCF shell commands that are mainly used for physical partition configuration-related operations.

There are two types of XSCF shell commands used to configure a physical partition: display-related commands and operation-related commands.
Table 3-1  Display-related Commands
Command Name Functional Outline
showpcl Displays physical partition configuration information.
showpparstatus Displays the physical partition status.
showboards Displays the system board status.
showfru Displays device setting information.
showdomainstatus Displays the logical domain status.
showcodactivation Displays the CPU Activation key information.
showcodusage Displays the usage status of the CPU core resources.
showcod Displays the CPU Activation registration and setting information.
showpparmode Displays the physical partition operation mode.
showdomainconfig Displays the logical domain configuration information for a physical partition.
Table 3-2  Operation-related Commands
Command Name Functional Outline
setupfru Sets memory mirroring.
setpcl Sets physical partition configuration information.
addcodactivation Adds a CPU Activation key.
setcod Assigns CPU core resources used in a physical partition (PPAR).
addboard Adds a system board (PSB) to a physical partition.
deleteboard Deletes a PSB from a physical partition.
setpparmode Sets the physical partition operation mode.
setdomainconfig Specifies the logical domain configuration information for a physical partition.
poweron Starts a physical partition.
poweroff Stops a physical partition.
console Connects to the control domain console.
This section describes the display-related commands and operation-related commands used for physical partition configuration in detail by using examples. For details of the options, operands, usage, etc. of each command, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual.
Note - The XSCF shell and XSCF Web user interfaces are provided for some administrators, and they require administrator privileges to configure a physical partition. In cases where multiple physical partition administrators share a system board, preparation and deliberate operational planning are required for safer system operation.