Skip to main content

6.4 Restoring XSCF Setting Information


6.4 Restoring XSCF Setting Information
This section describes how to restore the XSCF setting information saved to the USB device in "5.3 Saving XSCF Setting Information."
To restore the XSCF setting information, use the restoreconfig command as shown in the following example.
XSCF> restoreconfig -V file:///media/usb_msd/system.cfg
For details, see "10.10 Saving/Restoring XSCF Settings Information" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.