Skip to main content

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Notes Regarding Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
  3. Chapter 2 Understanding the System Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Confirming the Functions of the Operation Panel
    3. Click 2.3 Checking the LED Indications
    4. Click 2.4 Confirming the Types of Cable
  4. Chapter 3 Types of Maintenance
    1. Click 3.1 Types of Maintenance Supported for the Crossbar Box
    2.  3.2 Active Maintenance
    3.  3.3 Inactive Maintenance
    4.  3.4 System-Stopped Maintenance
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Confirming the System Configuration
    2. Click 4.2 Troubleshooting
    3. Click 4.3 Maintenance Precautions
  6. Chapter 5 Enabling the Removal of a FRU Requiring Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2. Click 5.2 Releasing the Chassis for a Connecting Physical Partition From the System
    3.  5.3 Saving XSCF Setting Information
    4. Click 5.4 Releasing FRUs of the Crossbar Box From the System With the replacefru Command
    5. Click 5.5 Accessing a FRU
  7. Chapter 6 Restoring the System
    1. Click 6.1 Restoring the Chassis
    2. Click 6.2 Incorporating the FRUs of the Crossbar Box Into the System With the replacefru Command
    3. Click 6.3 Diagnosing a Replacement FRU
    4.  6.4 Restoring XSCF Setting Information
    5.  6.5 Incorporating a Chassis Into a Physical Partition
    6.  6.6 Returning the Mode Switch to Locked Mode
    7.  6.7 Powering On the Physical Partition Requiring Maintenance
    8. Click 6.8 Starting the Entire System
  8. Chapter 7 Maintenance Flow
    1.  7.1 Maintenance Workflow
    2.  7.2 Active Maintenance Flow
    3.  7.3 Inactive Maintenance Flow
    4. Click 7.4 System-Stopped Maintenance Flow
  9. Chapter 8 Maintaining the XSCF Unit
    1.  8.1 Before Maintaining an XSCF Unit
    2.  8.2 Location of the XSCF Unit
    3.  8.3 Maintenance Precautions
    4.  8.4 Removing the XSCF Unit
    5.  8.5 Switching the microSD Card
    6.  8.6 Installing the XSCF Unit
    7.  8.7 Checking the XCP Firmware Version
  10. Chapter 9 Maintaining the XSCF BB Control Cables
    1.  9.1 Before Maintaining an XSCF BB Control Cable
    2.  9.2 Configuration of the XSCF BB Control Ports
    3.  9.3 Removing an XSCF BB Control Cable
    4.  9.4 Installing an XSCF BB Control Cable
  11. Chapter 10 Maintaining the XSCF DUAL Control Cables
    1.  10.1 Before Maintaining an XSCF DUAL Control Cable
    2.  10.2 Configuration of the XSCF DUAL Control Ports
    3.  10.3 Removing an XSCF DUAL Control Cable
    4.  10.4 Installing an XSCF DUAL Control Cable
  12. Chapter 11 Maintaining the Crossbar Cables (Optical)
    1.  11.1 Before Maintaining a Crossbar Cable (Optical)
    2.  11.2 Configuration of Connection Ports for Crossbar Cables (Optical)
    3.  11.3 Removing a Crossbar Cable (Optical)
    4.  11.4 Installing a Crossbar Cable (Optical)
  13. Chapter 12 Maintaining the Crossbar Units
    1.  12.1 Before Maintaining a Crossbar Unit
    2.  12.2 Configuration of the Crossbar Units
    3.  12.3 Removing a Crossbar Unit
    4.  12.4 Installing a Crossbar Unit
  14. Chapter 13 Maintaining the Power Supply Units
    1.  13.1 Before Maintaining a Power Supply Unit
    2.  13.2 Configuration of the Power Supply Units
    3.  13.3 Removing a Power Supply Unit
    4.  13.4 Installing a Power Supply Unit
  15. Chapter 14 Maintaining the XSCF Interface Unit
    1.  14.1 Before Maintaining an XSCF Interface Unit
    2.  14.2 Location of the XSCF Interface Unit
    3.  14.3 Maintenance Precautions
    4.  14.4 Removing the XSCF Interface Unit
    5.  14.5 Installing the XSCF Interface Unit
  16. Chapter 15 Maintaining the Fan Units
    1.  15.1 Before Maintaining a Fan Unit
    2.  15.2 Configuration of the Fan Units
    3. Click 15.3 Removing a Fan Unit
    4. Click 15.4 Installing a Fan Unit
  17. Chapter 16 Maintaining the Fan Backplane
    1.  16.1 Before Maintaining a Fan Backplane
    2.  16.2 Configuration of the Fan Backplane
    3. Click 16.3 Removing the Fan Backplane
    4. Click 16.4 Installing the Fan Backplane
  18. Chapter 17 Maintaining the Operation Panel
    1.  17.1 Before Maintaining the Operation Panel
    2.  17.2 Location of the Operation Panel
    3.  17.3 Maintenance Precautions
    4. Click 17.4 Removing the Operation Panel
    5. Click 17.5 Installing the Operation Panel
  19. Chapter 18 Maintaining the Cable Kit
    1.  18.1 Before Maintaining a Cable Kit
    2. Click 18.2 Configuration of the Cable Kit
    3. Click 18.3 Removing the Cable Kit
    4. Click 18.4 Installing the Cable Kit
  20. Chapter 19 Maintaining the Crossbar Backplane Unit
    1.  19.1 Before Maintaining a Crossbar Backplane Unit
    2.  19.2 Location of the Crossbar Backplane Unit
    3.  19.3 Removing the Crossbar Backplane Unit
    4.  19.4 Installing the Crossbar Backplane Unit
  21. Chapter 20 Maintaining the Dedicated Power Distribution Unit Mounted on the Rack for Expanded Connection
    1.  20.1 Before Maintaining a Dedicated Power Distribution Unit
    2. Click 20.2 Configuration of the Dedicated Power Distribution Unit
    3. Click 20.3 Removing the Dedicated Power Distribution Unit
    4.  20.4 Installing the Dedicated Power Distribution Unit
  22. Appendix A Component List
  23. Appendix B Component Specifications
    1.  B.1 Crossbar Unit
    2.  B.2 XSCF Unit
    3.  B.3 XSCF Interface Unit
    4.  B.4 Power Supply Unit
    5.  B.5 Fan Unit
    6.  B.6 Various Backplanes
    7.  B.7 Operation Panel
  24. Appendix C External Interface Specifications
    1. Click C.1 Serial Port
    2.  C.2 USB Port
    3.  C.3 RESET Switch
  25. Appendix D Removing the Lithium Battery
    1.  D.1 Location of the Lithium Battery
    2.  D.2 Removing the Lithium Battery

4.1.2 Confirming the Software and Firmware Configurations


4.1.2 Confirming the Software and Firmware Configurations
The software and firmware configurations and versions affect the operation of the system. To change the configuration or investigate a problem, check the latest state and check for any problems in the software.
Confirming the Software Configuration
Use Oracle Solaris commands to check the software configuration.
If you are logged in to the XSCF console, switch to the control domain console by executing the console command beforehand.
Table 4-1 lists the commands used for checking the software configuration.
Table 4-1  Commands for Checking the Software Configuration
Command Description
pkg (Oracle Solaris 11)
showrev (Oracle Solaris 10)		 Displays Oracle Solaris correction information and the version.
ldm Displays logical domain configuration information.
  1. For maintenance on physical partitions, log in to the control domain console of the physical partition where the FRU requiring maintenance is mounted.
    For details on how to log in to the control domain console, see "8.3 Switching to the Control Domain Console From the XSCF Shell" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide.
  2. Execute the pkg command to display Oracle Solaris correction information and the version.
  1. - For Oracle Solaris 11, execute the pkg command.
# pkg info entire
Name: entire
Summary: entire incorporation including Support Repository Update
(Oracle Solaris 11.1.12.5.0).
* SRU version
  1. - For Oracle Solaris 10, execute the showrev command.
# showrev -p
  1. To check the Oracle VM Server for SPARC version, execute the ldm command.
# ldm -V
Logical Domains Manager (v 3.1)
* Version of Oracle VM Server for SPARC
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.3
  1. The following is examples of executing commands to check logical domain configuration information.

    When checking from Oracle Solaris on the control domain
# ldm list-spconfig
factory-default (*1)
confirm_service_manual [current] (*2)
#
*1 factory-default configuration
*2 Currently running logical domain configuration

  1. When checking from the XSCF shell
XSCF> showdomainconfig -p 0
PPAR-ID :0
Booting config
(Current) :confirm_service_manual (*1)
(Next) :confirm_service_manual
-----------------------------------------------------------------------------

Index :1
config_name :factory-default (*2)
domains :1
date_created:-
-----------------------------------------------------------------------------

Index :2
config_name :config_develop_env
domains :3
date_created:'2016-05-24 19:40:55'
XSCF>
*1 Currently running logical domain configuration
*2 factory-default configuration

Confirming the Firmware Configuration
Check the XCP firmware version by using the version command, which is an XSCF shell command.
  1. Log in to the XSCF shell.
  2. Execute the version command to confirm the firmware version information.
    In the following example, "-c xcp" is entered to check the overall XCP version.
XSCF> version -c xcp
Check the firmware version of the PCI expansion unit by using the ioxadm command, which is an XSCF shell command.
  1. Log in to the XSCF shell.
  2. Identify the mounting locations of the PCI expansion unit and link card.
XSCF> ioxadm list
PCIBOX Link
PCIBOX#2007 BB#00-PCI#7 (*1)
PCIBOX#2006 BB#00-PCI#5
PCIBOX#2005 BB#00-PCI#3
PCIBOX#2004 BB#00-PCI#1
*1 Mounting locations of the PCI expansion unit and link card
  1. Execute the ioxadm command to check the firmware version information for the PCI expansion unit and link card.
XSCF> ioxadm -v list
Location Type FW Ver Serial Num Part Num State
PCIBOX#2007 PCIBOX - PZ21242007 On
PCIBOX#2007/PSU#0 PSU - FEJD1212000530 CA01022-0750-D/ On
PCIBOX#2007/PSU#1 PSU - FEJD1212000529 CA01022-0750-D/ On
PCIBOX#2007/IOB IOBOARD 1330 PP123300E5 CA20365-B66X 008AG On (*1)
PCIBOX#2007/LINKBD BOARD - PP141900V0 CA20365-B60X 008AD/7061035 On
PCIBOX#2007/FANBP FANBP - PP123203NT CA20365-B68X 004AC On
BB#00-PCI#07 CARD 1330 PP133200UF CA20365-B59X 008AD/7061040 On (*2)
*1 Firmware version on the I/O board
*2 Firmware version on the link card

Top of Page