Skip to main content

2.3.2 LEDs on the Rear Panel (System Locator)


2.3.2 LEDs on the Rear Panel (System Locator)
The field engineer and system administrator can confirm which chassis requires maintenance by using the CHECK LED (A in Figure 2-9) on the rear panel. Referred to as the system locator, the CHECK LED on the rear panel has the same function as the CHECK LED on the operation panel.
Figure 2-9  Location of the System Locator
Figure 2-9  Location of the System Locator
Table 2-9  Status of the System Locator
Icon Name Color Description
check CHECK Amber Indicates the system operation status for each chassis.
● On: An error has been detected in hardware.

● Blinking: Chassis specified at execution of the XSCF command instructing the blinking. This (locator) is used to identify the location of the chassis requiring maintenance.

● Off: Normal, or the power is disconnected or not being supplied.