Skip to main content

4.1.3 Confirming the FRU Information and Resource Information


4.1.3 Confirming the FRU Information and Resource Information
Use XSCF shell commands to check the FRU information and resource information.
Table 4-2 lists the commands used for checking the FRU information and resource information. For details on each command, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual for the XCP firmware version being used.
Table 4-2  Commands for Checking FRU Information and Resource Information
Command Description
showstatus Displays the FRU status. Out of the FRUs in the system configuration, this command displays information on a faulty or degraded unit or FRU.
showboards Displays information on a physical system board (PSB). Displays information on a physical system board that belongs to the specified physical partition and information on all the physical system boards that are mounted.
showpcl Displays the configuration information for a physical partition (hardware resource information).
showfru Displays the setting information for a device.