Skip to main content

20.3 Removing the Dedicated Power Distribution Unit


20.3 Removing the Dedicated Power Distribution Unit
This section describes the procedure for removing the dedicated power distribution unit.
Enable the removal of the dedicated power distribution unit before attempting to remove it. For details, see "Chapter 7 Maintenance Flow."
Caution - Before you handle any components, wear a wrist strap to ground any static electricity. If you perform this procedure without a wrist strap, individual components or the overall system may be damaged. For details, see "1.4 Notes Regarding Static Electricity."
Caution - Two people must be present when the power cords are to be removed. If you perform this work alone, you may injure yourself or cause damage to the PDU because the PDU is heavy.