Skip to main content

1.5 Other Precautions


1.5 Other Precautions
Caution - Observe the following precautions to ensure the safety of the system.
  1. Printed boards in the chassis can be easily damaged by static electricity. To prevent damage to printed boards, wear a wrist strap, and connect it to the chassis prior to starting maintenance.
  2. When mounting any component in the chassis, check the connectors on both the chassis and the component beforehand to confirm that no pin is bent and that all the pins are neatly arranged in lines. If a component is mounted with a bent pin in a connector, the chassis or component may be damaged. Also, carefully proceed with the work to prevent any pin from being bent.
  3. When removing a cable such as the LAN cable, if you cannot reach the latch lock of the connector, use a flat headed screwdriver etc. to push the latch and release the cable. Do not use excessive force to remove the cable. Otherwise, the LAN port could be damaged.
  4. Do not use any power cord other than the specified one.
  5. Check the appearance of the products before starting work. Confirm that there are no faults such as unit deformation or connector damage when opening the packaging.
    Do not install the products if there is a fault in the appearance. If you mount a product that has a fault in the appearance, it may damage the server and the crossbar box.