Skip to main content

10.2 Configuration of the XSCF DUAL Control Ports


10.2 Configuration of the XSCF DUAL Control Ports
This section describes configuration and location of the XSCF DUAL control ports.
The XSCF DUAL control cable is used to connect the master XSCF and a standby XSCF that are mounted on a crossbar box so as to duplicate the XSCF.

Figure 10-1  Location of the XSCF DUAL Control Port
Figure 10-1  Location of the XSCF DUAL Control Port
Location Number Connection Port
1 XSCF DUAL control port