Skip to main content

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Notes Regarding Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
    7. Click 1.7 Important Information About the XCP Firmware
  3. Chapter 2 Understanding the PCI Expansion Unit Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Checking the Status With the LEDs
  4. Chapter 3 Types of Maintenance
    1.  3.1 Maintenance Types of the PCI Expansion Unit
    2.  3.2 Types of Maintenance for the Link Card
    3. Click 3.3 Types of Maintenance for the PCIe Card
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Troubleshooting
    2. Click 4.2 Precautions for Maintenance
  6. Chapter 5 Preparations Required for Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2.  5.2 Checking the PCI Expansion Unit Requiring Maintenance and the Destination Physical Partition
    3.  5.3 Checking the Firmware Version of the PCI Expansion Unit
    4. Click 5.4 Checking the Operating Condition and Resource Usage Status
    5. Click 5.5 Releasing the Link Card or PCIe Card From the System
    6.  5.6 Stopping the FRU Requiring Maintenance
    7. Click 5.7 Accessing a FRU
  7. Chapter 6 Understanding the Preparations for Restoring the System
    1. Click 6.1 Restoring the Chassis of the PCI Expansion Unit
    2.  6.2 Supplying Power to the FRU Requiring Maintenance
    3. Click 6.3 Mounting a Link Card or PCIe Card on the System
    4. Click 6.4 Restoring the Logical Domain to the Status It Had Before Maintenance
    5.  6.5 Turning Off the CHECK LED (Locator) of the PCI Expansion Unit
    6. Click 6.6 Updating the Firmware of the PCI Expansion Unit
  8. Chapter 7 Maintenance Flow
    1. Click 7.1 FRU Replacement Workflow for the PCI Expansion Unit
    2. Click 7.2 FRU Addition Workflow for the PCI Expansion Unit
    3. Click 7.3 FRU Removal Workflow for the PCI Expansion Unit
    4. Click 7.4 Link Card Maintenance Workflow
  9. Chapter 8 Maintaining the PCI Express Cards
    1.  8.1 Before Maintaining a PCI Express Card
    2.  8.2 Configuration of the PCIe Cards
    3. Click 8.3 Removing a PCI Express Card
    4. Click 8.4 Installing a PCI Express Card
  10. Chapter 9 Maintaining the Link Board
    1.  9.1 Before Maintaining the Link Board
    2.  9.2 Configuration of the Link Board
    3. Click 9.3 Removing the Link Board
    4. Click 9.4 Installing the Link Board
  11. Chapter 10 Maintaining the Link Cards
    1.  10.1 Before Maintaining a Link Card
    2.  10.2 Configuration of a Link Card
    3.  10.3 Removing a Link Card
    4.  10.4 Installing a Link Card
  12. Chapter 11 Maintaining the Link Cables
    1.  11.1 Before Maintaining a Link Cable
    2.  11.2 Configuration of the Link Cable Connection Ports
    3.  11.3 Removing a Link Cable
    4.  11.4 Installing a Link Cable
  13. Chapter 12 Maintaining the Management Cable
    1.  12.1 Before Maintaining the Management Cable
    2.  12.2 Configuration of the Management Cable Connection Port
    3.  12.3 Removing the Management Cable
    4.  12.4 Installing the Management Cable
  14. Chapter 13 Maintaining the Power Supply Units
    1.  13.1 Before Maintaining a Power Supply Unit
    2.  13.2 Configuration of the Power Supply Units
    3.  13.3 Removing a Power Supply Unit
    4.  13.4 Installing a Power Supply Unit
  15. Chapter 14 Maintaining the Fan Units
    1.  14.1 Before Maintaining a Fan Unit
    2.  14.2 Configuration of the Fan Units
    3. Click 14.3 Removing a Fan Unit
    4. Click 14.4 Installing a Fan Unit
  16. Chapter 15 Maintaining the PCI Tray
    1.  15.1 Before Maintaining the PCI Tray
    2.  15.2 Configuration of the PCI Tray
    3. Click 15.3 Removing the PCI Tray
    4. Click 15.4 Installing the PCI Tray
  17. Chapter 16 Maintaining the I/O Board
    1.  16.1 Before Maintaining the I/O Board
    2.  16.2 Configuration of the I/O Board
    3. Click 16.3 Removing the I/O Board
    4. Click 16.4 Installing the I/O Board
  18. Chapter 17 Maintaining the Fan Backplane
    1.  17.1 Before Maintaining the Fan Backplane
    2.  17.2 Fan Backplane Location
    3. Click 17.3 Removing the Fan Backplane
    4. Click 17.4 Installing the Fan Backplane
  19. Appendix A Component List
  20. Appendix B Component Specifications
    1.  B.1 PCI Express Card
    2.  B.2 Link Board
    3.  B.3 Power Supply Unit
    4.  B.4 Fan Unit
    5.  B.5 PCI Tray
    6.  B.6 I/O Board
    7.  B.7 Fan Backplane
  21. Appendix C Problems During Firmware Update

Preface


Preface
This document describes the maintenance procedures for the PCI expansion unit of the Oracle or Fujitsu SPARC M12/M10. The maintenance work should be performed by service engineers and/or field engineers.
Fujitsu SPARC M12 is sold as SPARC M12 by Fujitsu in Japan.
Fujitsu SPARC M12 and SPARC M12 are identical products.

Fujitsu M10 is sold as SPARC M10 by Fujitsu in Japan.
Fujitsu M10 and SPARC M10 are identical products.
The preface includes the following sections:
  1. Audience
  2. Related Documentation
  3. Notes on Safety
  4. Text Conventions
  5. Syntax of the Command-Line Interface (CLI)
  6. Document Feedback
Audience
This document is intended for trained technicians and authorized service personnel who have been instructed on the hazards within the equipment and are qualified to remove and replace hardware. They may be called service engineers or field engineers.
Related Documentation
All documents for your server are available online at the following locations.

For a system using the SPARC M12, see the manuals listed in "Documentation Related to the SPARC M12."

For a system using the SPARC M10, see the manuals listed in "Documentation Related to the SPARC M10."
Documentation Related to the SPARC M12
Manual Names (*1)
Fujitsu SPARC M12 Product Notes
Fujitsu SPARC M12 Quick Guide
Fujitsu SPARC M12 Getting Started Guide (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Software License Conditions for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Security Guide
Fujitsu SPARC Servers/SPARC Enterprise/PRIMEQUEST Common Installation Planning Manual
Fujitsu SPARC M12-1 Installation Guide
Fujitsu SPARC M12-2 Installation Guide
Fujitsu SPARC M12-2S Installation Guide
Fujitsu SPARC M12 PCI Card Installation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 RCIL User Guide (*3)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF MIB and Trap Lists
Fujitsu SPARC M12-1 Service Manual
Fujitsu SPARC M12-2/M12-2S Service Manual
Crossbar Box for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
PCI Expansion Unit for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Glossary
External USB-DVD Drive user guide
*1 The listed manuals are subject to change without notice.
*2 Printed manuals are provided with the product.
*3 This document applies specifically to the SPARC M12/M10 and FUJITSU ETERNUS disk storage system.
Documentation Related to the SPARC M10
Manual Names (*1)
Fujitsu M10/SPARC M10 Systems Product Notes
Fujitsu M10/SPARC M10 Systems Quick Guide
Fujitsu M10/SPARC M10 Systems Getting Started Guide (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Software License Conditions for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Security Guide
Fujitsu SPARC Servers/SPARC Enterprise/PRIMEQUEST Common Installation Planning Manual
Fujitsu M10-1/SPARC M10-1 Installation Guide
Fujitsu M10-4/SPARC M10-4 Installation Guide
Fujitsu M10-4S/SPARC M10-4S Installation Guide
Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 RCIL User Guide (*3)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF MIB and Trap Lists
Fujitsu M10-1/SPARC M10-1 Service Manual
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
Crossbar Box for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
PCI Expansion Unit for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Glossary
External USB-DVD Drive user guide
*1 The listed manuals are subject to change without notice.
*2 Printed manuals are provided with the product.
*3 This document applies specifically to the SPARC M12/M10 and FUJITSU ETERNUS disk storage system.
Notes on Safety
Read the following documents thoroughly before using or handling the SPARC M12/M10.
  1. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety Information
  2. Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Text Conventions
This manual uses the following fonts and symbols to express specific types of information.
Font/Symbol Meaning Example
AaBbCc123 What you type, when contrasted with on-screen computer output.
This font is used to indicate an example of command input.		 XSCF> adduser jsmith
AaBbCc123 The names of commands, files, and directories; on-screen computer output.
This font is used to indicate an example of command output in the frame.		 XSCF> showuser -P
User Name:    jsmith
Privileges:   useradm
              auditadm
Italic Indicates the name of a reference manual. See the Fujitsu M10-1/SPARC M10-1 Installation Guide.
" " Indicates the names of chapters, sections, items, buttons, or menus. See "Chapter 2 Network Connection."
Command Syntax in the Text
While the XSCF commands have a section number of (8) or (1), it is omitted from the text.
For details on the commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual.
Syntax of the Command-Line Interface (CLI)
The command syntax is as follows:
  1. A variable that requires the input of a value is in Italics.
  2. An optional element is enclosed in [].
  3. A group of options for an optional keyword is enclosed in [] and delimited by |.
Document Feedback
If you have any comments or requests regarding this document, please take a moment to share them with us. Along with the manual code, manual title, and page number, state your points specifically at one of the following websites:

Top of Page