Skip to main content

Appendix C Problems During Firmware Update


Appendix C Problems During Firmware Update
This appendix explains the problems that may occur during firmware update.
The following errors may occur:
  1. The XSCF hangs while the firmware is being updated.
    Action: Update the firmware again.
  2. The PCI expansion unit hangs while the firmware is being updated.
    Action: Either the link card or the I/O board has a failure. Replace the failed part.
  3. An error message related to a write failure "FROM write error" appears.
    If an error occurs during firmware update, operation continues using the previous version of the firmware.
    Action: Update the firmware again. The firmware update may end normally. If an error occurs again during the firmware update, the I/O board has a failure. Replace the failed part.