Skip to main content

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Notes Regarding Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
    7. Click 1.7 Important Information About the XCP Firmware
  3. Chapter 2 Understanding the PCI Expansion Unit Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Checking the Status With the LEDs
  4. Chapter 3 Types of Maintenance
    1.  3.1 Maintenance Types of the PCI Expansion Unit
    2.  3.2 Types of Maintenance for the Link Card
    3. Click 3.3 Types of Maintenance for the PCIe Card
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Troubleshooting
    2. Click 4.2 Precautions for Maintenance
  6. Chapter 5 Preparations Required for Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2.  5.2 Checking the PCI Expansion Unit Requiring Maintenance and the Destination Physical Partition
    3.  5.3 Checking the Firmware Version of the PCI Expansion Unit
    4. Click 5.4 Checking the Operating Condition and Resource Usage Status
    5. Click 5.5 Releasing the Link Card or PCIe Card From the System
    6.  5.6 Stopping the FRU Requiring Maintenance
    7. Click 5.7 Accessing a FRU
  7. Chapter 6 Understanding the Preparations for Restoring the System
    1. Click 6.1 Restoring the Chassis of the PCI Expansion Unit
    2.  6.2 Supplying Power to the FRU Requiring Maintenance
    3. Click 6.3 Mounting a Link Card or PCIe Card on the System
    4. Click 6.4 Restoring the Logical Domain to the Status It Had Before Maintenance
    5.  6.5 Turning Off the CHECK LED (Locator) of the PCI Expansion Unit
    6. Click 6.6 Updating the Firmware of the PCI Expansion Unit
  8. Chapter 7 Maintenance Flow
    1. Click 7.1 FRU Replacement Workflow for the PCI Expansion Unit
    2. Click 7.2 FRU Addition Workflow for the PCI Expansion Unit
    3. Click 7.3 FRU Removal Workflow for the PCI Expansion Unit
    4. Click 7.4 Link Card Maintenance Workflow
  9. Chapter 8 Maintaining the PCI Express Cards
    1.  8.1 Before Maintaining a PCI Express Card
    2.  8.2 Configuration of the PCIe Cards
    3. Click 8.3 Removing a PCI Express Card
    4. Click 8.4 Installing a PCI Express Card
  10. Chapter 9 Maintaining the Link Board
    1.  9.1 Before Maintaining the Link Board
    2.  9.2 Configuration of the Link Board
    3. Click 9.3 Removing the Link Board
    4. Click 9.4 Installing the Link Board
  11. Chapter 10 Maintaining the Link Cards
    1.  10.1 Before Maintaining a Link Card
    2.  10.2 Configuration of a Link Card
    3.  10.3 Removing a Link Card
    4.  10.4 Installing a Link Card
  12. Chapter 11 Maintaining the Link Cables
    1.  11.1 Before Maintaining a Link Cable
    2.  11.2 Configuration of the Link Cable Connection Ports
    3.  11.3 Removing a Link Cable
    4.  11.4 Installing a Link Cable
  13. Chapter 12 Maintaining the Management Cable
    1.  12.1 Before Maintaining the Management Cable
    2.  12.2 Configuration of the Management Cable Connection Port
    3.  12.3 Removing the Management Cable
    4.  12.4 Installing the Management Cable
  14. Chapter 13 Maintaining the Power Supply Units
    1.  13.1 Before Maintaining a Power Supply Unit
    2.  13.2 Configuration of the Power Supply Units
    3.  13.3 Removing a Power Supply Unit
    4.  13.4 Installing a Power Supply Unit
  15. Chapter 14 Maintaining the Fan Units
    1.  14.1 Before Maintaining a Fan Unit
    2.  14.2 Configuration of the Fan Units
    3. Click 14.3 Removing a Fan Unit
    4. Click 14.4 Installing a Fan Unit
  16. Chapter 15 Maintaining the PCI Tray
    1.  15.1 Before Maintaining the PCI Tray
    2.  15.2 Configuration of the PCI Tray
    3. Click 15.3 Removing the PCI Tray
    4. Click 15.4 Installing the PCI Tray
  17. Chapter 16 Maintaining the I/O Board
    1.  16.1 Before Maintaining the I/O Board
    2.  16.2 Configuration of the I/O Board
    3. Click 16.3 Removing the I/O Board
    4. Click 16.4 Installing the I/O Board
  18. Chapter 17 Maintaining the Fan Backplane
    1.  17.1 Before Maintaining the Fan Backplane
    2.  17.2 Fan Backplane Location
    3. Click 17.3 Removing the Fan Backplane
    4. Click 17.4 Installing the Fan Backplane
  19. Appendix A Component List
  20. Appendix B Component Specifications
    1.  B.1 PCI Express Card
    2.  B.2 Link Board
    3.  B.3 Power Supply Unit
    4.  B.4 Fan Unit
    5.  B.5 PCI Tray
    6.  B.6 I/O Board
    7.  B.7 Fan Backplane
  21. Appendix C Problems During Firmware Update

5.5.3 Releasing the Link Card or PCIe Card After Stopping the System


5.5.3 Releasing the Link Card or PCIe Card After Stopping the System
Cold maintenance of the PCI expansion unit can be performed after stopping the system.
This section describes the procedure for stopping a system to which the PCI expansion unit is connected.
For details on the procedure, see "Stopping the Entire System" in the Service Manual for your server.
Stopping the System With the XSCF Command
  1. Confirm that the mode switch on the operation panel is in Service mode.
  2. Log in to the XSCF shell.
  3. Execute the poweroff command.
  4. Check that the POWER LED on the operation panel is off.
  5. Execute the showpparstatus command to confirm that the power to the physical partition is turned off.
  6. Execute the showdomainstatus command to confirm the operating condition of the logical domain.
Stopping the System From the Operation Panel
  1. Confirm that the mode switch on the operation panel is in Service mode.
  2. Press the power switch on the operation panel for 4 seconds or more.
  3. Check that the POWER LED on the operation panel is off.
  4. Execute the showpparstatus command to confirm that the power to the physical partition is turned off.
  5. Execute the showdomainstatus command to confirm the operating condition of the logical domain.

Top of Page