Skip to main content

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Precautions on Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
  3. Chapter 2 Understanding the System Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Checking the Memory Configuration Rules
    3. Click 2.3 Confirming the Functions of the Operation Panel
    4. Click 2.4 Checking the Indications by LEDs
  4. Chapter 3 Types of Maintenance
    1.  3.1 Types of Maintenance Supported by the SPARC M12-1
    2.  3.2 Active Maintenance
    3.  3.3 System-Stopped Maintenance (Inactive Maintenance)
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Confirming the System Configuration
    2. Click 4.2 Troubleshooting
    3. Click 4.3 Maintenance Precautions
  6. Chapter 5 Preparations Required for Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2.  5.2 Switching the Mode Switch to Service Mode
    3. Click 5.3 Checking the Operating Condition and Resource Usage Status
    4. Click 5.4 Enabling the Removal of a HDD/SSD
    5. Click 5.5 Stopping the Entire System
    6. Click 5.6 Saving Setting Information and Configuration Information
    7.  5.7 Releasing a FRU From the System With the replacefru Command
    8. Click 5.8 Accessing a FRU
  7. Chapter 6 Understanding the Preparations for Restoring the System
    1. Click 6.1 Restoring the Server
    2.  6.2 Incorporating a FRU Into the System With the replacefru Command
    3. Click 6.3 When Replacing the MBU/PSUBP
    4.  6.4 Diagnosing a Replacement FRU
    5. Click 6.5 Restoring Setting Information and Configuration Information
    6.  6.6 Incorporating the HDD/SSD
    7.  6.7 Checking the FRU Status After Maintenance
    8.  6.8 Returning the Mode Switch to Locked Mode
    9. Click 6.9 Starting the System
  8. Chapter 7 Maintenance Flow
    1.  7.1 Maintenance Workflow
    2. Click 7.2 FRU Replacement Workflow
    3. Click 7.3 FRU Addition Workflow
    4. Click 7.4 FRU Removal Workflow
  9. Chapter 8 Maintaining the PCI Express Cards
    1.  8.1 Before Maintenance on a PCIe Card
    2.  8.2 PCIe Card Configuration
    3. Click 8.3 Removing a PCIe Card
    4. Click 8.4 Installing a PCIe Card
  10. Chapter 9 Maintaining Internal Storage
    1.  9.1 Before Maintenance on an HDD/SSD
    2.  9.2 HDD/SSD Configuration
    3.  9.3 Removing an HDD/SSD
    4.  9.4 Installing an HDD/SSD
  11. Chapter 10 Maintaining the HDD Backplane
    1.  10.1 Before Maintenance on the HDDBP
    2.  10.2 Location of the HDDBP
    3. Click 10.3 Removing the HDDBP
    4. Click 10.4 Installing the HDDBP
  12. Chapter 11 Maintaining the Power Supply Units
    1.  11.1 Before Maintenance on a PSU
    2.  11.2 PSU Configuration
    3. Click 11.3 Removing a PSU
    4. Click 11.4 Installing a PSU
  13. Chapter 12 Maintaining the PSU Backplane
    1.  12.1 Before Maintenance on the PSUBP
    2.  12.2 Location of the PSUBP
    3.  12.3 Precautions for PSUBP Maintenance
    4. Click 12.4 Removing the PSUBP
    5. Click 12.5 Installing the PSUBP
  14. Chapter 13 Maintaining the Cable Kit
    1.  13.1 Before Maintaining the Cable Kit
    2.  13.2 Location of the Cable Kit
    3. Click 13.3 Removing the Cable Kit
    4. Click 13.4 Installing the Cable Kit
  15. Chapter 14 Maintaining the Operation Panel
    1.  14.1 Before Maintenance on the OPNL
    2.  14.2 Location of the OPNL
    3. Click 14.3 Removing the OPNL
    4. Click 14.4 Installing the OPNL
  16. Chapter 15 Maintaining the Fan Units
    1.  15.1 Before Maintenance on the FANU
    2.  15.2 FANU Configuration
    3. Click 15.3 Removing a FANU
    4. Click 15.4 Installing a FANU
  17. Chapter 16 Maintaining the Motherboard Unit/Memory
    1.  16.1 Before Maintenance on the MBU and Memory
    2.  16.2 Location of the MBU
    3.  16.3 Memory Locations
    4.  16.4 Precautions for MBU Replacement
    5. Click 16.5 Removing the MBU and Memory
    6. Click 16.6 Installing the MBU and Memory
  18. Appendix A Component List
  19. Appendix B Component Specifications
    1.  B.1 MBU
    2.  B.2 PSU
    3.  B.3 FANU
    4.  B.4 HDD/SSD
    5.  B.5 PCIe Card
    6.  B.6 Backplanes
    7.  B.7 OPNL
  20. Appendix C Oracle Solaris Troubleshooting Commands
    1.  C.1 iostat Command
    2.  C.2 prtdiag Command
    3.  C.3 prtconf Command
    4.  C.4 netstat Command
    5.  C.5 ping Command
    6.  C.6 ps Command
    7.  C.7 prstat Command
  21. Appendix D External Interface Specifications
    1. Click D.1 Serial Port
    2.  D.2 USB Port
    3.  D.3 SAS Port
    4.  D.4 RESET Switch
  22. Appendix E Removing the Lithium Battery
    1.  E.1 Location of the Lithium Battery
    2.  E.2 Removing the Lithium Battery

5.4.1 How to Identify the HDD/SSD Slot


5.4.1 How to Identify the HDD/SSD Slot
To maintain an HDD/SSD, you need to know the physical device name or logical device name of the drive to be installed or removed. If a disk error occurs in the system, you can normally check on the system console for messages regarding a disk that is likely to fail or that has already failed. This information is also recorded in the /var/adm/messages file.
In these error messages, a failed internal disk drive is normally indicated with a physical device name or logical device name. In addition, depending on the application, the slot number of the HDD/SSD may be reported.
The procedure to check information on HDD/SSD mounting locations varies depending on the operating system.
Using the format command (Oracle Solaris 11)
  1. Execute the format command to check the HDD/SSD slots.
    (1) to (4) in the following example represent:

    (1): Logical path name of the disk

    (2): The disk is mounted in the HDD#0 slot

    (3): The disk is mounted in the HDD#1 slot

    (4): The disk is mounted in the HDD#2 slot
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2t50000393B81B3A36d0 <TOSHIBA-MBF2600RC-3706 cyl 46873 alt 2 hd 20 sec 625> <-- (1)
/pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393b81b3a36,0
/dev/chassis/SYS/HDD00/disk <-- (2)
1. c2t500000E01FB332A2d0 <FUJITSU-MBD2600RC-3701 cyl 46873 alt 2 hd 20 sec 625> <-- (1)
/pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w500000e01fb332a2,0
/dev/chassis/SYS/HDD01/disk <-- (3)
2. c2t50000393B81B4D7Ad0 <TOSHIBA-MBF2600RC-3706 cyl 46873 alt 2 hd 20 sec 625> <-- (1)
/pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393b81b4d7a,0
/dev/chassis/SYS/HDD02/disk <-- (4)
Specify disk (enter its number):
Using the diskinfo command (Oracle Solaris 11)
  1. Execute the diskinfo command to check the HDD/SSD slots.
    (1) to (3) in the following example represent:

    (1): Device path name and logical path name of the disk mounted in HDD#0

    (2): Device path name and logical path name of the disk mounted in HDD#1

    (3): Device path name and logical path name of the disk mounted in HDD#2
# diskinfo
D:devchassis-path c:occupant-compdev
------------------------------------------ ---------------------

:
/dev/chassis/SYS/HDD00/disk c0t50000393B81B3A36d0 <-- (1)
/dev/chassis/SYS/HDD01/disk c0t500000E01FB332A2d0 <-- (2)
/dev/chassis/SYS/HDD02/disk c0t50000393B81B4D7Ad0 <-- (3)
/dev/chassis/SYS/HDD03/disk
/dev/chassis/SYS/HDD04/disk
/dev/chassis/SYS/HDD05/disk
/dev/chassis/SYS/HDD06/disk
/dev/chassis/SYS/HDD07/disk
#
Using the diskinfo command (Oracle Solaris 10)
  1. Execute the diskinfo command to check the HDD/SSD slots.
    (1) to (3) in the following example represent:

    (1): Device path name and logical path name of the disk mounted in HDD#0

    (2): Device path name and logical path name of the disk mounted in HDD#1

    (3): Device path name and logical path name of the disk mounted in HDD#2
# diskinfo -ap

Enclosure path: TZ01232002-physical-hba-0
Chassis Serial Number: TZ01232002-physical-hba-0
Chassis Model: ORCL,SPARC64-X

Enclosure path: /dev/es/ses0
Chassis Serial Number: 500000e0e04901bf
Chassis Model: FUJITSU-NBBEXP

Label Disk name Vendor Product Vers
---------- ---------------------- -------- ---------------- ----

HDD_0 c0t50000393B81B3A36d0 TOSHIBA MBF2600RC 3706 <-- (1)
Physical path
--------------------------------

0: /pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393b81b3a36,0
HDD_1 c0t500000E01FB332A2d0 TOSHIBA MBF2600RC 3706 <-- (2)
Physical path
--------------------------------

0: /pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w500000e01fb332a2,0
HDD_2 c0t50000393B81B4D7Ad0 TOSHIBA MBF2600RC 3706 <-- (3)
Physical path
--------------------------------

0: /pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393b81b4d7a,0

Top of Page