Skip to main content

Contents

  1. Preface
  2. Chapter 1 Before Starting Maintenance Work
    1.  1.1 Warning/Caution Indications
    2.  1.2 Labels/Tags
    3.  1.3 Safety Precautions
    4.  1.4 Precautions on Static Electricity
    5.  1.5 Other Precautions
    6.  1.6 Emergency Power Off
  3. Chapter 2 Understanding the System Components
    1.  2.1 Identifying the Names and Locations of Components
    2. Click 2.2 Checking the Memory Configuration Rules
    3. Click 2.3 Confirming the Functions of the Operation Panel
    4. Click 2.4 Checking the Indications by LEDs
  4. Chapter 3 Types of Maintenance
    1.  3.1 Types of Maintenance Supported by the SPARC M12-1
    2.  3.2 Active Maintenance
    3.  3.3 System-Stopped Maintenance (Inactive Maintenance)
  5. Chapter 4 Preparation and Precautions for Maintenance
    1. Click 4.1 Confirming the System Configuration
    2. Click 4.2 Troubleshooting
    3. Click 4.3 Maintenance Precautions
  6. Chapter 5 Preparations Required for Maintenance
    1.  5.1 Preparing Tools Required for Maintenance
    2.  5.2 Switching the Mode Switch to Service Mode
    3. Click 5.3 Checking the Operating Condition and Resource Usage Status
    4. Click 5.4 Enabling the Removal of a HDD/SSD
    5. Click 5.5 Stopping the Entire System
    6. Click 5.6 Saving Setting Information and Configuration Information
    7.  5.7 Releasing a FRU From the System With the replacefru Command
    8. Click 5.8 Accessing a FRU
  7. Chapter 6 Understanding the Preparations for Restoring the System
    1. Click 6.1 Restoring the Server
    2.  6.2 Incorporating a FRU Into the System With the replacefru Command
    3. Click 6.3 When Replacing the MBU/PSUBP
    4.  6.4 Diagnosing a Replacement FRU
    5. Click 6.5 Restoring Setting Information and Configuration Information
    6.  6.6 Incorporating the HDD/SSD
    7.  6.7 Checking the FRU Status After Maintenance
    8.  6.8 Returning the Mode Switch to Locked Mode
    9. Click 6.9 Starting the System
  8. Chapter 7 Maintenance Flow
    1.  7.1 Maintenance Workflow
    2. Click 7.2 FRU Replacement Workflow
    3. Click 7.3 FRU Addition Workflow
    4. Click 7.4 FRU Removal Workflow
  9. Chapter 8 Maintaining the PCI Express Cards
    1.  8.1 Before Maintenance on a PCIe Card
    2.  8.2 PCIe Card Configuration
    3. Click 8.3 Removing a PCIe Card
    4. Click 8.4 Installing a PCIe Card
  10. Chapter 9 Maintaining Internal Storage
    1.  9.1 Before Maintenance on an HDD/SSD
    2.  9.2 HDD/SSD Configuration
    3.  9.3 Removing an HDD/SSD
    4.  9.4 Installing an HDD/SSD
  11. Chapter 10 Maintaining the HDD Backplane
    1.  10.1 Before Maintenance on the HDDBP
    2.  10.2 Location of the HDDBP
    3. Click 10.3 Removing the HDDBP
    4. Click 10.4 Installing the HDDBP
  12. Chapter 11 Maintaining the Power Supply Units
    1.  11.1 Before Maintenance on a PSU
    2.  11.2 PSU Configuration
    3. Click 11.3 Removing a PSU
    4. Click 11.4 Installing a PSU
  13. Chapter 12 Maintaining the PSU Backplane
    1.  12.1 Before Maintenance on the PSUBP
    2.  12.2 Location of the PSUBP
    3.  12.3 Precautions for PSUBP Maintenance
    4. Click 12.4 Removing the PSUBP
    5. Click 12.5 Installing the PSUBP
  14. Chapter 13 Maintaining the Cable Kit
    1.  13.1 Before Maintaining the Cable Kit
    2.  13.2 Location of the Cable Kit
    3. Click 13.3 Removing the Cable Kit
    4. Click 13.4 Installing the Cable Kit
  15. Chapter 14 Maintaining the Operation Panel
    1.  14.1 Before Maintenance on the OPNL
    2.  14.2 Location of the OPNL
    3. Click 14.3 Removing the OPNL
    4. Click 14.4 Installing the OPNL
  16. Chapter 15 Maintaining the Fan Units
    1.  15.1 Before Maintenance on the FANU
    2.  15.2 FANU Configuration
    3. Click 15.3 Removing a FANU
    4. Click 15.4 Installing a FANU
  17. Chapter 16 Maintaining the Motherboard Unit/Memory
    1.  16.1 Before Maintenance on the MBU and Memory
    2.  16.2 Location of the MBU
    3.  16.3 Memory Locations
    4.  16.4 Precautions for MBU Replacement
    5. Click 16.5 Removing the MBU and Memory
    6. Click 16.6 Installing the MBU and Memory
  18. Appendix A Component List
  19. Appendix B Component Specifications
    1.  B.1 MBU
    2.  B.2 PSU
    3.  B.3 FANU
    4.  B.4 HDD/SSD
    5.  B.5 PCIe Card
    6.  B.6 Backplanes
    7.  B.7 OPNL
  20. Appendix C Oracle Solaris Troubleshooting Commands
    1.  C.1 iostat Command
    2.  C.2 prtdiag Command
    3.  C.3 prtconf Command
    4.  C.4 netstat Command
    5.  C.5 ping Command
    6.  C.6 ps Command
    7.  C.7 prstat Command
  21. Appendix D External Interface Specifications
    1. Click D.1 Serial Port
    2.  D.2 USB Port
    3.  D.3 SAS Port
    4.  D.4 RESET Switch
  22. Appendix E Removing the Lithium Battery
    1.  E.1 Location of the Lithium Battery
    2.  E.2 Removing the Lithium Battery

16.5.4 Switching the SD Card


16.5.4 Switching the SD Card
If you replace the MBU, the firmware version may be different from that used before the replacement. To use the same firmware version as that used before the replacement, remove the SD card from the replaced MBU, and install it in the replacement MBU.
  1. Loosen the screw (A in Figure 16-8) securing the SD card protection cover fixed to the removed MBU, then slide the protection cover towards the memory, and lift up to remove the cover.
Figure 16-8  Removing the SD Card Protection Cover
Figure 16-8 Removing the SD Card Protection Cover
  1. Remove the SD card.
    Release the lock by pressing the SD card (1 in Figure 16-9), and then remove the card from the MBU (2 in Figure 16-9).
Figure 16-9  Removing the SD Card
Figure 16-9 Removing the SD Card
Note - Be careful not to mix up the removed SD card with the SD card installed in the replacement part.
  1. Install an SD card.
    Insert the SD card that contains the XSCF firmware to be used into the socket of the MBU. Secure the SD card by pushing it until its latch locks into place.
Figure 16-10  Installing an SD Card
Figure 16-10 Installing an SD Card
Caution - Be careful not to damage the SD card connector by pushing in the SD card too hard.
  1. Install the SD card protection cover.
    Install the protection cover on the MBU, and secure it with the screw (A in Figure 16-11).
Figure 16-11  Installing the SD Card Protection Cover
Figure 16-11 Installing the SD Card Protection Cover
Note - Return the SD card supplied with the new MBU by installing it in the removed MBU.

Top of Page